How to Determine Correct Replacement For UFP H1377 Hub
Question:
I’m looking for a pre-greased galvanized hub assembly for UFP H-1377 P120 with a bolt pattern of 5x115. Can you assist please. I understand most kits require assembly and grease, but I’m trying to bolt off and bolt on. Thanks.
asked by: Jose M
Expert Reply:
I'm sure we can get you a pre-greased hub assembly to replace your UFP H1377, but I was unable to find any definitive information on exactly what will replace this hub. So in order to find the correct hubs you will need to take apart your current hub assembly and look at the bearings themselves; wipe away the grease and you should be able to see the part number stamped directly on them.
If you are unable to find them, you need to use a digital caliper and measure your spindle where the bearings ride, like in the photo I added.
So for example, if your inner bearing is L68149 (1.378" inner diameter) and outer bearing is L44649 (1.063" inner diameter), you would use the Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased # AKIHUB-545-35-K.
I have added a link below to our entire selection of pre-greased hubs for you once you find this info.
(click to enlarge)
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Galvanized
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Q&A: Replacement Hub for a UFP H-1377 on a 2004 Tahoe Boat Trailer
- Shop: Replacement Trailer Hub Bearing - L44649
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Grease Seal
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Q&A: Replacement Hub, Bearings, Races, and Seals for Trailer Hub with H-1377 Bearing
- Q&A: Which Grease Seal is Associated with L68149 Bearing and L68110 Race on a Boat Trailer Hub
- Q&A: When Using Bearing Buddy Bearing Protectors Do I Need To Repack Bearings Periodically?
- Q&A: What is the Difference Between Trailer Hub Race L68110 and L68111
- Search Results: grease seal
- Q&A: How to Pick Out Replacement Hub for UFP Hub Marked H-1377 A4E
- Q&A: Correct Replacement for UFP H-1377 Trailer Hub
- Search Results: 84545 hub
- Video: etrailer Trailer Bearings Races Seals Caps - Races - 25520 Review
- Video: Choosing the Right Trailer Wiring
- Search Results: 44649
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Search Results: 25580
- Article: Most Popular Wheel Bearings
- Shop: Trailer Wiring
- Video: Choosing the Right Brake Controller
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Fifth Wheel Hitch
- Search Results: 68149
- Search Results: dust cap
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
on Trailer Hubs and Drums
