Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Install this hub-and-drum assembly on your trailer. Fits 6,000-lb and 7,000-lb axles. Inner bearing (25580) and race, outer bearing (15123) and race, grease seal, grease cap, wheel bolts, and lug nuts included.
Features:
Specs:
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Average Customer Rating: 4.8 out of 5 stars (29 Customer Reviews)
Install this hub-and-drum assembly on your trailer. Fits 6,000-lb and 7,000-lb axles. Inner bearing (25580) and race, outer bearing (15123) and race, grease seal, grease cap, wheel bolts, and lug nuts included.I wish it came with a new axle nut and washer, but i was able to use my originals so no big deal. good product, fit perfect
Everything fit perfect but I have never been able to adjust the brakes so they actually work.
The parts were all the right ones and most were Dexter oem parts. The only problem I had was putting the bolts in the frame end of the spring perch. It was easier to take the spring loose from the axle, put the bolt in ,then bolt it back to the axle. I intend to buy all of my future trailer parts from etrailer.
Etrailer makes shopping for easy, great pictures and descriptions make it easy to find the right part. This drum was an exact fit for our Dexter brake system on an older tri-axle. We replaced all 6 and they look and fit as the original.
Received quick and what we ordered
It was exactly what I needed. Easy to find on the internet, easy to order. The price was good and the shipping was quick and free. Thank you.
Perfect fit! Very easy to install. Delivery was also very fast. We'll done etrailer.
This is an awesome sight. My purchase was correct and timely. I will definitely be ordering from etrailer in the future. Excellent job.
Very good price for authentic made in the usa parts, cant beat that
They are a perfect replacement for the 2x12 dexter utility. You are better off going with these rather than the cheaper ones.
Great experience. Only problem...the carrier delivered it to my neighbors house. Guess they can't read the address label:)
item was right the only I had trouble with was the seal after getting it in it keep popping out had to buy different one , Angie was a great help I would definitely use them again
great hub. Fit exactly like it should will order again if another one goes bad
was exactly as I ordered and quick ship ping
Fit perfectly. All the parts were there all I had to was add grease. Thanks so much for the speedy and free shipping. Love you guys!!!
Thanks for the great service. Everything was delivered on time and fit perfectly.
not many of these hubs around...looks good like the original hub....thanks...
Excellent service, fast ,great product
MADE THE JOB A LOT FASTER
Excellent
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
5/3/2022
We do have the spindle nut for the one inch spindle as separate part, part # 165686. The matching washer would be part # SW1000.