Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Make up for the height difference between your RV and towed vehicle with this hitch adapter. Provides either a 6" drop or a 6" rise. Solid shank provides strength and durability.
Features:
Specs:
Note: This adapter is designed to flat tow a vehicle only. Do not use to tow a trailer. When using with a hitch-mounted accessory, such as a bike rack or cargo carrier, the tongue weight of your hitch will be reduced by at least 50 percent.
Most tow systems require some sort of hitch accessory to either raise or lower the tow bar to an appropriate level. The "Safe Zone" for a motor-home-mounted tow bar ranges from 3" above level to 3" below. Car-mounted models must be absolutely level. This high-low adapter can provide you with the necessary drop or desired rise to achieve a level tow bar setup.
Average Customer Rating: 4.9 out of 5 stars (155 Customer Reviews)
Make up for the height difference between your RV and towed vehicle with this hitch adapter. Provides either a 6" drop or a 6" rise. Solid shank provides strength and durability.
Simple to install and absolutely needed to keep the tow bar within 3" of the hitch height. Plus when I went over a steep driveway in my 30' Winnebago Vista, I was concerned that this may bottom out - but instead, there was a frame rail under the RV that scraped instead. This unit was well clear. If you find yourself in a situation where this could scrape the ground, it is easy just to put the brake on in the car and pull the release pin on the this unit. Then, reconnect later.
Works like a charm! I bought an entire toad tow package kit wiring, breaking system tow bar, base plates everything ! My ranger all the way to Mount Rushmore last year and everything worked great! The trailer support was excellent whilst I was installing everything! Multiple calls to tech-support got me through and made for a successful install. I would not hesitate to buy From them again!
Roadmaster quality is very consistent. Drop ship from Roadmaster was fast.
Created a nice level towing setup for my 2018 Chevrolet Colorado behind my 2023 Entegra Esteem Class C motorhome.
I needed the Roadmaster high-low adapter to drop my tow point down so my tow bar was level between my Motorhome and my Chevy Colorado. It works as advertised and even with the weight of the truck pulling on the drop of the bar it is solid enough I feel very confident that I will be able to tow for many carefree miles.
Works perfect for ensuring tow bar is l evel.
400 pound TW. We carry two e-bikes on the back of our coach and needed to raise the bike rack. Strong and perfect fit.
etrailer has great products that you can trust. I’ve purchased from them multiple times and have always been pleased with the experience.
The 6" drop hitch was just what I needed to level my tow bar between my (Georgetown) RV and (Jeep Wrangler Unlimited Sahara) towed vehicle.
It is a very strong, solid piece. Just completed a round trip between 700 mile round-trip with no problems.
The run-through of the unit dimensions in your video really helped to ensure the unit was the right fit for my RV receiver and tow bar.
My motorhome was to high to tow my Jeep so I needed this hitch adapter to bring the tow bar inline with my vehicle.
Ed S.
11/17/2014
I sold my vehicle and purchased a new jeep and no longer utilize the adapter. I purchased a new roadmaster tow bracket from u and so far its fine.
Worked great to level the tow bar out between our lifted Jeep and the RV. Very stout and glad we went with heavier duty unit
Just what you need if your 4 wheel drive pickup is too high. I use it to get my wheel chair ramp close enough to the ground to use.
Very well made.
Jay V.
7/18/2018
Excellent, I use it for everything because my Dodge Rams receiver is 30 off the ground
Rachael H.
7/19/2018
Helpful Links
Ball-Mounts/Gen-Y-Hitch/325-GH-515.html
dept-pg-Ball_Mounts-hs-Fits_2_Inch_Hitch-pm-Gen~Y_Hitch.aspx
The product works as described. There is one problem in compatibility with a Blue Ox tow bar. The pin holes in the receiver are pressed rather than drilled. This process decreases the inner receptacle size and it has to be increased by manually filing the inside of the tow bar receiver. Structurally well made.
Exactly what we needed.
Purchased for bike rack , I am handicapped and this adapter will lower it and make it easier to load my three wheeled bike This company is awesome to deal with Thank You
Mike L.
5/5/2018
Please keep in mind that using this or any hitch adapter or extender will lower the towing and tongue weight capacity of your hitch by half.
Great product. Heavy duty, well-made. Works perfect for my custom hitch application.
Mark B.
12/31/2015
Great product, functions as advertised
I installed a TorkLift Eco Hitch on the front of my F250. It sits higher than most front hitches. I need this drop receiver to lower my motorcycle below my line of sight! VERY heavy duty!
works great, it is the right drop for the toad car so it pulls level. I have seen some toads being pulled and the hitch receiver is to high so the front of the car is being pulled at an upward angle, which is not a good idea.
I needed this high/low hitch receiver to bring the hitch up to level to pull my jeep behind my RV. It works excellent, very happy with it one year later!
Very good, heavy construction. Pin hole for the MH reciever should be a couple inches farther back.
I recently purchased the 6" hitch extension from e-trailer... which fit perfect thanks to the wonderful help I received from Debora H. Without her help and all the time she spent with me on the phone I would have purchased the wrong one...again. I appreciate all her help, she saved me from another frustrating purchase and return. The hitch extension she recommended fit perfect for my application and was less expensive than the one I was originally looking at. Thank you again for your help.
Received the product in excellent time. It is just what we needed and were very pleased that we could get the drop hitch made by Roadmaster as it will match the tow bar that we have on out motorhome and tow vehicle.
Very well built and finished. I'm using this hitch adapter to level my tow bar while flat towing my jeep. It works perfect.
I bought this drop hitch because I carry a motorcycle sideways on a rack behind my SUV. The SUV sits high so pushing the motorcycle up the ramp is difficult and lowering that rack makes loading and unloading easier and safer. The SUV also has the spare tire on the rear door and this drop hitch moves the rack out about two inches giving me more room for the bike. The big thing about this drop hitch is it’s strength. My bike weighs 350 pounds this hitch is rated at 400 pounds but it can probably handle much more than the class III hitch itself.
This high-low hutch adapter was exactly what I needed for The proper height to tow my dinghy/car. Very well-made & no worries about being able to handle the weight. My tow vehicle is a 2017 Ford F150.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Drew G.
3/5/2018
Solid chunk of metal. No problems. Need to keep areas that rub treated for rust, but thats expected.