Where to Place Axles on 14 Foot Long Tandem Axle
Question:
Where would the center be for tandem axle placement on a 14foot trailer? what would the wheel spacing be hub to hub? We have double eye springs that are 27inch in length Thanks for any help you can give.
asked by: D L
Expert Reply:
To determine the location for the front and rear hangers on your tandem axle trailer you will first need to make sure that you have the correct center point for your equalizer hanger.
The center point of your equalizer hanger needs to be located where you will have 60 percent of the frame of the trailer in front of the center of the equalizer hanger and 40 percent behind the center of the equalizer hanger. For example, if the trailers frames length is 14 feet, then the center-line location for the equalizer hanger will be 8.4 feet from the front of the trailer and 5.6. feet from the back.
This is where to start with when picking out axle locations for a tandem axle trailer. You will need to determine the tongue weight of the trailer and then check out the picture I attached if the tongue weight is anything other than 10 percent of the total trailer weight.
It depends on the hangers you use, but most likely the distance between your axle centers will be around 32 inches.
Product Page this Question was Asked From
Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front/Rear, 2-1/2" Center
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Tandem Axle
- etrailer
more information >
Continue Researching
- Article: Where to Position the Trailer Axle?
- Shop: Kenda Karrier ST205/75R14 Radial Trailer Tire with 14" Black Mod Wheel - 5 on 4-1/2 - LR C
- Shop: Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front/Rear, 2-1/2" Center
- Shop: Kenda Karrier ST205/75R15 Radial Trailer Tire with 15" Black Mod Wheel - 5 on 4-1/2 - LR C
- Shop: Kenda Karrier ST205/75R15 Radial Trailer Tire with 15" Black Mod Wheel - 5 on 4-1/2 - LR D
- Q&A: How to Determine the Correct Axle Position When Building a Trailer
- Q&A: Placement of Front and Rear Hangers When Building a Tandem Axle Trailer
- Q&A: What Is The Angle For The etrailer A-Frame Trailer Coupler?
- Q&A: Replacement Brake Assemblies For AL-KO Brake Assemblies K363301 and K363602
- Q&A: Where to Place Axles on a 16 Foot Long Trailer
- Shop: Loadstar ST205/75D14 Bias Trailer Tire with 14" Black Wheel - 5 on 4-1/2 - Load Range C
- Search Results: al ko trailer brakes 8k 12x3 3/8
- Search Results: tailgate hinges
- Search Results: trailer hinges
- Search Results: generator rack
- Shop: Replacement Brake Adjuster Kit for Dexter 12-1/4" Forward Self-Adjusting Brakes
- Shop: Dump Door Hinge for Dump Trailers - Steel - Qty 1
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Trailer Tire Sizing
- Search Results: trailer brakes
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Video: Choosing the Right Brake Controller
- Q&A: What is the Difference Between Load Range C and D ST175/80D13 Trailer Tires
- Article: Trailer Wiring Diagrams
- Search Results: lug nuts
- Article: Most Popular Wheel Bearings
- Search Results: lug nut
- Shop: Suspension Enhancement
- Video: Timbren Axle-Less Trailer Suspension System Installation