Peterson Trailer Light Kit Review Video

I have two options for you to raise your trailer and gain more clearance between the fender and tire. The most cost effective option would be to flip the axles with a Dexter Trailer Springs Over-Under Kit part #K71-384-00 or part #K71-385-00. That…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

If you have a 4-way trailer connector like #118418 then I recommend using a wishbone harness to wire your trailer. The 20 Ft 4-Way Trailer Wiring Harness - Wishbone Style - 30" Ground #A20WB is my recommendation for your wiring because it will…

Yes, the replacement light will still work. Although there are common colors for the wiring on a trailer, nothing is set in stone so the colors of the wiring can vary. Just be sure to ground the white wire of the Optronics Square LED Trailer…

The mounting studs on the lights included with trailer tail light kit #TL5RK are 2 inches apart on center. I have linked a video showing an example installation of this kit for you.

The two have never been tested together and are from different manufacturers, so with that said, from what I can see it looks like the Tekonsha OEM Replacement Vehicle Wiring Harness with Brake Controller Adapter #22117 is compatible with the 7- and…

The Replacement Vehicle Wiring Harness #22117 is a replacement harness for the factory 7-way on your 2017 Toyota Tacoma and is not a brake controller. Your boat trailer has a 7-pole adapter so you may already have a 7-way on your Tacoma; you would…

To add a 7-way to your 2020 Toyota Tacoma that currently does not have one the best solution is the Tekonsha 7-way kit part #22117. This comes with everything you'd need to install the 7-way so it's a perfect solution for you.

I have the perfect solution for you! In order to add trailer connections on to your 2020 Toyota Tacoma I recommend using the Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter #22117 which provides you with an easy to install,…

The power and ground wires of the Tekonsha 7-way wiring harness part #22117 that you referenced are 10 gauge and they are rated for 30 amps.

Yes, the Curt Replacement OEM USCAR Trailer Connector part #C42JR will fit inside the rear bumper on a 2020 Toyota Tacoma. That said, in order to complete the rest of your wiring you'll need the Tekonsha OEM Replacement Vehicle Wiring Harness…

It sounds like your trailer has a special type of 4-pole connector called a wishbone harness, such as 20-foot #A20WB or 35-foot #A35W42B. These wishbone harnesses simply use two brown running light wires to make it easier to wire your trailer's…