What is Gauge and Amperage Rating of Wiring of Tekonsha 7-Way for 2019 Toyota Tacoma

Question

Question:

What is the current capacity or wire gauge of the ground and 12V auxiliary wires? Thank you.

asked by: Jay C

0

Expert Reply:

The power and ground wires of the Tekonsha 7-way wiring harness part # 22117 that you referenced are 10 gauge and they are rated for 30 amps.

expert reply by: Jameson C

0

click to enlarge

Answer 1

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 2

The two have never been tested together and are from different manufacturers, so with that said, from what I can see it looks like the Tekonsha OEM Replacement Vehicle Wiring Harness with Brake Controller Adapter #22117 is compatible with the 7-…

view full answer...

Answer 3

The Replacement Vehicle Wiring Harness #22117 is a replacement harness for the factory 7-way on your 2017 Toyota Tacoma and is not a brake controller. Your boat trailer has a 7-pole adapter so you may already have a 7-way on your Tacoma; you would…

view full answer...

Answer 4

Yes, the Curt Replacement OEM USCAR Trailer Connector part #C42JR will fit inside the rear bumper on a 2020 Toyota Tacoma. That said, in order to complete the rest of your wiring you'll need the Tekonsha OEM Replacement Vehicle Wiring Harness…

view full answer...

Answer 5

I have the perfect solution for you! In order to add trailer connections on to your 2020 Toyota Tacoma I recommend using the Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter #22117 which provides you with an easy to install,…

view full answer...

Answer 6

To add a 7-way to your 2020 Toyota Tacoma that currently does not have one the best solution is the Tekonsha 7-way kit part #22117. This comes with everything you'd need to install the 7-way so it's a perfect solution for you.

view full answer...

Answer 7

The Tekonsha OEM Replacement wiring part #22117 comes with three fuses. It comes with one 25 amp fuse and two 30 amp fuses. It also comes with 3 inline fuse holders. There should not be a 10 amp mini fuse with the kit. This Tekonsha harness is meant…

view full answer...

Answer 8

If you are certain that the ground on the truck is the problem then what you can do is run a new ground from the back of the trailer connector directly to a clean, bare metal surface on the truck frame. Make sure the new location is free of…

view full answer...

Answer 9

I reached out to my contact at Tekonsha regarding the OEM Replacement Vehicle Wiring Harness #22117. He said the kit was recently changed to include the 10 amp fuse to use if necessary on certain vehicles. You do not need to use the fuse and for the…

view full answer...

Answer 10

On the Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter - 7 Way Trailer Connector #22117 you do need to run the red wire to the battery. That gives power to your towing harness so that the turn/stop and running light…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

What is Gauge and Amperage Rating of Wiring of Tekonsha 7-Way for 2019 Toyota Tacoma

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching