Optronics Replacement Flush Mount Rubber Grommet Review Video

Your 2024 Chevrolet Silverado 3500 will come with a 2-1/2" trailer hitch receiver. If your truck did not come with a reducer for a 2" receiver we do have the B&W #BWRHXA2182 if you need to use your 2" ball mount or…

The replacement grommet for the LED Trailer Mini Clearance and Side Marker Light with Grommet #MCL10AKB is found as part #A11GB and will fit just fine with 18 gauge and 1-1/16" thick walls

I did some checking and for Sealed, Mini LED Side Marker, Clearance or Identification Light #MCL13A2B the mounting holes are spaced 2 inches apart on center. I have linked a video featuring this light for you.

We have found that the Seaflo Diaphragm water pumps like the part #SE57FR are very quiet compared to other options but especially compared to the Shurflo pump you have. This is also a 3 gallon per minute pump rated for 55 PSI.

The Oval Reflector for Optronics Uni-Lite Trailer Lights, part #A11RXB may work well for your lights, even with a grommet like part #A11GB. I have attached a couple of photos that show the dimensions of both the #A11RXB as well as the #A11GB. The…

The outside diameter of the fitting of the #RE64FR drain tube is 7/8 of an inch. You can see a product description video for the drain tube by clicking the provided link.

The grommet measures about 1/8" thick and the inner diameter is 1/4". The inner diameter of the front of the grommet where the light goes is 1". I have attached a diagram for your reference.

The Dometic 300 Toilet, #DOM64FR has a total length of 19-3/4" with a minimum distance from wall to center of 8-1/2". The Dometic 320, #DOM87FR is overall length of 22" with a minimum distance from wall to center of 11". If you…

Thanks for the pictures! Yes, the replacement vent lid part #BV0554-03 that you referenced is the correct fit for the vent you have on your Stealth Cargo Trailer and is smoked like you prefer. This will let in some light whereas the white does not…

In regards to the RV Tub Drain with Threaded Stopper part #372184030-A, the hole size that the drain is designed to fit is 2" whereas the fitting size that attaches to the drain pipe is 1-1/2".

The outer diameter of the tail flange of the Sink Strainer w/ Threaded Basket and Tail Flange #3729490-217-022 is 3/4 inches and the outer diameter of the entire assembly is 2-1/2 inches.

I have attached a drawing showing the dimensions of the drain hole location. It is 6-1/2" from the closest edge and centered 16" long ways, and the hole dimension is 2". I would recommend the JR Products #3729495-211-022 chrome plated…