Dimensions of Sink Strainer w/ Threaded Basket and Tail Flange # 3729490-217-022

Question

Question:

What is the rim diameter and what size is the threaded tail pipe?

asked by: Bill M

0

Expert Reply:

The outer diameter of the tail flange of the Sink Strainer w/ Threaded Basket and Tail Flange # 3729490-217-022 is 3/4 inches and the outer diameter of the entire assembly is 2-1/2 inches.

expert reply by: Jameson C

0

Answer 1

I have attached a drawing showing the dimensions of the drain hole location. It is 6-1/2" from the closest edge and centered 16" long ways, and the hole dimension is 2". I would recommend the JR Products #3729495-211-022 chrome plated…

view full answer...

Answer 2

In regards to the RV Tub Drain with Threaded Stopper part #372184030-A, the hole size that the drain is designed to fit is 2" whereas the fitting size that attaches to the drain pipe is 1-1/2".

view full answer...

Answer 3

Please take a look at these options, the LaSalle Bristol RV Shower Drain, #34465CAR227G, ##34465WAR227G, #34465PR227G. These all have a threaded section of 1-7/8". Note product review videos please.

view full answer...

Answer 4

The Sink Strainer w/ Threaded Basket and Tail Flange for 2" Drain part #3729490-217-022 is meant to be used with standard 3/4" plumbing lines found in camper's.

view full answer...

Answer 5

The MORryde Generator Tray - 15-3/4" x 16-1/4" #MR99RR is 16-1/4" in length x 15-3/4" wide. I've attached a diagram that will show you all of the dimensions of this generator tray.

view full answer...

Answer 6

Thanks for the picture! Yes, you can use the NOCO Genius Smart Battery Charger item #329-GENIUS10 to charge your two interstate RM27 Interstate marine batteries over winter and it is the correct size for your batteries. It will lower the charging…

view full answer...

Answer 7

The Dometic 300 Toilet, #DOM64FR has a total length of 19-3/4" with a minimum distance from wall to center of 8-1/2". The Dometic 320, #DOM87FR is overall length of 22" with a minimum distance from wall to center of 11". If you…

view full answer...

Answer 8

The threaded portion of the LaSalle Bristol #34433793W sink drain is 1.837 inches.

view full answer...

Answer 9

The slight gap you see is normal. The drum is not supposed to make contact with the brake mounting plate. There are some instances when mixing brands of brakes, hubs, and axles, that won't line up properly but in this case it is normal. I did…

view full answer...

Answer 10

Because the Valterra RV Water Tank #R8048 is a lightweight tank that is baffled for surge control, it is not designed for use with electric water pumps. It would void the warranty if used this way and is why they specifically note on their site:…

view full answer...

Answer 11

The correct bearing kit for your 2018 Winnebago Micro Minnie 2108DS with Lippert 3,500 Lb axles is the Bearing Kit for #84 Spindles part #BK2-100 which uses L44649 and L68149 bearings.

view full answer...