Optronics LED Submersible Tail Light Review and Installation STL16RB Video

Hey Dave, what you gave me is enough info to get you replacement bearings. The grease seal 471750 matches the part #TMK48ZR. For a Timken replacement for the L44610 part number you'd need #TMK63VR. Then for a bearing for the L44649 you'd want…

A trailer that is over 80 inches wide is required by DOT regulations to have rear clearance lights. An over 80 inch taillight kit, like part #TL16RK, will have the side clearance light built into it. An under 80 inch taillight does not have the…

We actually have a handy help article, linked to the right for you, that explains this and other helpful information on trailer lights. Below is an excerpt: The light beam emitted from a P2 or P3 light spreads out 45 degrees to each side of its…

The term PC-Rated in reference to trailer lighting means Photometrically Certified. What this means in actual practice is that a light fixture is viewable from a 90-degree angle. Other non-PC-rated lights are considered to be viewable from a 45…

From what we've found online, the proper replacement for your S2T216AP2 is #STL16RB for the passenger side and #STL17RB for the driver side.

I did some research and found that the 12194TC seal you said you have measures 1.250 inside diameter, and 1.979 outside diameter. The seal I recommend is part #34823. The dimensions listed for this seal are 1.249 inside diameter and 1.983 outside…

I did some research and found that the 12194TC seal you said you have measures 1.250 inside diameter, and 1.979 outside diameter. The seal I recommend is part #34823. The dimensions listed for this seal are 1.249 inside diameter and 1.983 outside…

I looked up pictures of the taillights that are on the 3110 Featherlite trailers and for the LED version of them you would want the part #STL36RB and #STL37RB. It looks like the spare tire mounts for your trailer are something you would have to get…

I checked the Featherlite website for photos of the LED lights used on their tandem axle aluminum car hauler trailer model 3110. The specs for this trailer indicate it uses LED type clearance and stop/turn lights but brand and dimensions are not…

I've attached a wiring diagram for the 7-Way Molded Trailer Wire Connector #H20044, however there is no guide available to tell us the wire color functions on the trailer so you'll have to test each wire in order to determine its function. If…

Thank you for the photos! From what you sent in it looks like the LED Combination tail lights from Optronics are what you need: - Driver Side #STL17RB - Passenger Side #STL16RB Attached is a review and installation video for you to check out!

Our three wire lights like what the harness part #A47PB is designed to fit have the white wire as ground, the black wire for tail light, and the red wire for stop/turn signal. That covers all of the standard trailer taillight functions.