Malone SaddleUp Pro Kayak Carrier Replacement Saddle Review Video

I have a fitment answer for you. The reason why the Malone SteelTop Roof Rack - Square Crossbars - Raised, Factory Side Rails - Steel - 65" Long #MPG203 is not listed as a confirmed fit for your vehicle is because the 65" length of…

The max bar space the Thule Hullavator part #TH898 can take up is 28-1/2 inches so you'd need a set of bars around 60 inch long. The height of the carrier is right at 16 inches so you'd lose 16 inches from your current roof height…

The Thule #TH898 Hullavator fits square bars from Thule, SportRack, Rhino Rack, Inno, and Malone among others. I've yet to come across a square bar that it won't fit.

The Thule Hullavator part #TH898 that you referenced needs to have 4 to 8 inches of crossbar that extends past the foot of the roof rack. 12 inches would be too much. If you can move the crossbars in the feet you could slide the bars 4 inches in…

Malone has a 50 inch square bar roof rack that fits your 2018 Toyota Rav4 with raised rails with the part #MPG201. Sounds like you just need the feet of this rack which for that you'd just need the part #MAL25YR.

If your existing crossbars extend 4 to 8 inches beyond the outboard edge of the roof rack foot as shown in the provided diagram, the Thule #TH898 Hullavator Pro would work perfectly for you. This 4 to 8 inch clearance is necessary to prevent the…

The correct weight of the Thule Hullavator Pro #TH898 is 39.7 pounds The weight capacity of a roof rack will limit how much can be carried on it for sure. As will the weight capacity of the vehicle's roof which is often less than the rack and the…

The Thule Hullavator Pro Kayak Carrier #TH898 can certainly be installed onto a roof rack that is not Thule brand. To determine what size crossbars you need, you will want to measure from the center of one roof rail to the center of the next roof…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…