Kuat Bike Rack Bike Add-On Review Video

Hello again Michelle. The Saris Glide EX Bike Rack #SA774 will indeed fit a 2023 Hyundai Tucson with a class 3 hitch. The tilt feature will allow the hitch to open and close normally. Saris bike racks are definitely good quality. They are all made…

To replace the hitch pin of your Kuat Transfer V2 Bike Rack #KU84FR you can use the Hitch Lock for Kuat Bike Racks - 2" Hitches #HL2. This hitch pin comes with a lock so that you can also prevent anyone from taking off with your bike rack.

Hello Michelle. To answer your first question, the Kuat Transfer 4 #KU77FR should not touch the ground when tilted on a 2023 Hyundai Tucson with the Curt Class 3 Hitch #C94WR, but it will be very close. We tested this bike rack on a 2018 Subaru…

I spoke with my contact at Curt, who tells me that you can simply disconnect the existing exhaust hanger, install the hitch, and then use the bolt shown in the diagram I have provided to reinstall the bracket. The bolt would pass through the exhaust…

The only difference between the #HL1 and #HL2 hitch lock is the diameter. HL1 is 3/8" in diameter and the HL2 is 1/2". Measure the diameter of the hole you have to see which one is closer. If the hole is more than 1/2" you can use…

If you have the Kuat Transfer V2 Bike Rack for 2 Bikes #KU84FR then the correct add-on to convert it to a 3-bike carrier is 1 Bike Add-On for Kuat Transfer Bike Racks #KU57FR.

Thank you for your purchase of the Kuat NV 2.0 Bike Rack #NV22G! When it comes to lighting I have an alternate solution to what you're asking with the following parts: Curt Auxiliary LED Indicator Lights - #C53201 Thule License Plate Holder for…

When the Kuat Transfer V2 Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches #KU74FR is in the folded position with the shank also folded upright, it measures 46-3/4" wide and 30-5/8" long (see attached photo). In case you were…

It sounds like you have the Kuat Transfer V1. If that is the case, the weight capacity is actually 40lbs. instead of 45lbs. This would not be adequate for using your 50lb. e-bike. You would need to upgrade to the Kuat Transfer V2 Bike Rack #KU64FR,…

The correct hitch lock for your Kuat Transfer V2 Bike Rack for 1 Bike - 1-1/4" and 2" Hitches - Wheel Mount #KU64FR is the Hitch Lock for Kuat Bike Racks - 2" Hitches #HL1. This will allow you to lock the Transfer V2 to your vehicles…

If you are using the Kuat Transfer V2 Bike Rack for 1 Bike #KU64FR for a 2-inch hitch, I confirmed with Kuat that you will need the #HL1 because of the 1-1/4 adapter sleeve that comes with the rack.

A simple license plate holder that will get the job done is the Yakima PlateMate #Y02713. This installs on the bike rack or bikes using some hook and loop straps in multiple places so you can get the license plate in the best position. Attached is a…