Hollywood Racks LED Light Bar Review Video

Due to the limits of trailer taillight wiring circuits your Hollywod Racks Safety LED light bar part #HLY54RR is functioning properly. The turn signals and the stoplights are all on the same circuit so the lights are going to all light up when you…

To replace the hitch pin of your Kuat Transfer V2 Bike Rack #KU84FR you can use the Hitch Lock for Kuat Bike Racks - 2" Hitches #HL2. This hitch pin comes with a lock so that you can also prevent anyone from taking off with your bike rack.

Thank you for your purchase of the Kuat NV 2.0 Bike Rack #NV22G! When it comes to lighting I have an alternate solution to what you're asking with the following parts: Curt Auxiliary LED Indicator Lights - #C53201 Thule License Plate Holder for…

When the Kuat Transfer V2 Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches #KU74FR is in the folded position with the shank also folded upright, it measures 46-3/4" wide and 30-5/8" long (see attached photo). In case you were…

Curt 4-pole trailer wiring harness #C59236 is a confirmed fit on your 2013 Mini Cooper Countryman S. For both types of PWM wiring systems, ST (combined stop and tail) and STT (combined stop, turn AND tail) you DO ground the harness brown wire along…

What you would need to do is install a 4-way at the rear of your travel trailer that taps into it's trailer lighting circuits. For that you'd want the #18252 which will give you a 4-way for the Hollywood Racks bike rack light kit part…

The only difference between the #HL1 and #HL2 hitch lock is the diameter. HL1 is 3/8" in diameter and the HL2 is 1/2". Measure the diameter of the hole you have to see which one is closer. If the hole is more than 1/2" you can use…

We have some light bars that will work with a platform style bike rack like your Hollywood Racks Sport Rider #HLY84FR, but there is no light bar made for your bike rack specifically. Can it be done? Yes, but you will need to find a safe way of…

I have a great bike rack solution for you. Unfortunately, since your Aventon Adventure E-Bike weighs 73 pounds, it exceeds any maximum weight capacity of a bike rack with an integrated ramp option. With that being said, if you absolutely need a ramp…

For your 106-pound Ariel Rider Grizzly, the highest weight capacity of racks we have is 80 pounds. One of those racks, for example, is the Hollywood Racks RV Rider #HLY64FR. With that being said, for the best option for your 106-pound e-bike, I…

The problem you are experiencing is pretty common for vehicles that have seen a couple winters. What happens is the weld nuts get a bit of corrosion in them and that prevents the bolts from being able to thread. This makes it seem like the nuts are…

If you have the Kuat Transfer V2 Bike Rack for 2 Bikes #KU84FR then the correct add-on to convert it to a 3-bike carrier is 1 Bike Add-On for Kuat Transfer Bike Racks #KU57FR.