Hopkins 7-Way to 4-Wire Flat Heavy-Duty Trailer Coiled Wire Adapter Review Video

It is possible there is an internal problem on the #HM56200. With it plugged in use a circuit tester to probe the wires of the harness that go into the converter box and then test to see if the voltage makes it out to the other side of the box. If…

The Curt Custom Base Plate Kit #C38FR fits a 2016 Jeep Wrangler Unlimited with the standard factory bumper. Since you have a 75th Anniversary Edition it has a special bumper I recommend going with the Roadmaster Direct-Connect Base Plate Kit #1444-3…

The BX88406 EZ Light Wiring Harness #BLU86XR is designed to fit 2014-2023 Grand Cherokee (No L)(w/Tow Package) & 2022 Grand Cherokee (No L) (w/o Tow Package). You would instead need the BX88285 (if you have a JK), which we don't currently…

The trailer light kit, #TL36RK, only comes with 2 marker/clearance lights in addition to the wiring and tail lights. Trailer light kit #TL16RK comes with 2 additional reflectors, not lights, that you could place as needed. I was looking through the…

Yes, it will! The Curt Pintle Hook with 2-5/16" Ball item #C45908 will easily connect to your portable silo's lunette ring and allow you to safely tow it. This ball mount fits a 2-1/2" hitch receiver, includes a 2-5/16" hitch ball,…

Hey Jonathan, thanks for reaching out! The U-Bolts that come in the Crossbars for Malone MicroSport Trailers Kit #MPG4001 have the following specs: - (6) 1.50” x 2” long , 3/8" diameter - (2) 4.50” x 2” long , 3/8" diameter My contact at…

We don't unfortunately, Colby. We do have an extra long bunk kit #CE11416 for the CE Smith Bunk-Style Guide-Ons #CE27660 which will get you a bit closer because it'll work with 3" x 5 1/4" tall frames, but not 6" like…

Adjustable trailer couplers are not going to mount to your truck; they will attach to the frame of your trailer. Some of the adjustable couplers, such as the Bulldog Cast Head #BDA2563C0317 come with the mounting hardware to weld onto the frame of…

The Demco #DM12688-95 you've looked at would be a good choice. The 2 inch channel mount coupler is compatible with a 3 inch channel, and has bolt spacing of 2 inches on center. Demco is known for high quality products, you'll get years of…

There is pretty much a standard for channel mount couplers such as #DM12113-95. The channel width is usually 3 inches and the couplers are usually around 2-7/8 inches wide to fit in the 3 inch wide channel. Once torqued down there is no side to side…

Nope, the Curt TriFlex NEXT #C24VV will not have to set up and be recalibrated when the vehicle is turned off, it will keep the settings you use.

Best option would be the part #CE11416 which was designed to fit a 3 by 5 inch frame. The U-bolts are 6 inches long and have an inner width of 3 inches.