Fulton Channel Tongue Coupler with Hand Wheel Latch Repair Kit Review Video

The most common type of brakes found on tow dollys are electric drum brakes. This is because electric brakes are typically the more cost effective option over hydraulic brakes and electric brake systems typically require less maintenance than…

A 235/75R15 size tire will mount to a 15 inch wheel that features a width range of 6 to 8.50 inches. With this in mind, the Dexstar Steel Mini Mod Trailer Wheel #AM20545 that you referenced should work nicely with your off-road tires, as it features…

The adjustment wheel that you are using to tighten the brakes just needs to be turned the other way. The adjustment wheel just pushes out the spread of the shoes or takes them back in if turned the other way. Nev-R-Adjust brakes like #23-459 work the…

We do offer 60-inch replacement trailer axles from Dexter and both can be seen on the link provided. Note that both of these are rated for 2000-lbs. The 5-on-5-1/2-inch hub you referenced, part #84555UC1, is intended for 3500-lb axles. The most…

The 3500-lb Timbren axle-less suspension kits #ASR3500S06 (regular tires) and #ASR35HDS01 (off-road tires) differ in that the kit for wider off-road tires provides a 2-inch greater distance from the mounting point on the trailer frame to the hub…

After installing replacement brakes such as the Dexter Nev-R-Adjust Electric Trailer Brake Kit, #23-468-469, proper adjustment is needed for that initial setting. If your brakes are engaging but not enough to apply ample friction for stopping then…

The best solution we have is going to be a new surge coupler like the #099-175-00. Some of the Dico and Titan parts are interchangeable in recent years but since your trailer is almost 30 years old it's tough to say what all would still work.…

If the trigger broke on your Pro Series A-Frame Trailer Coupler #PSE338050303 then you would need to replace the whole unit. I reached out to my contact at Pro Series who said that they unfortunately do not have carry any replacement parts for this…

It is not uncommon for the trailer hangers on a tandem axle trailer to be all the same size or for there to be different sizes that can be 1-1/2 to 2 inches different in height when you compare the center hanger to the front and rear. For example,…

Your welded-on trailer hubs are likely to be damaged during the process of sandblasting and powder coating which is why you were told to remove the axle. The best option for you, especially since you are converting your trailer to a fish house, is to…

I attached a diagram that has all of the relevant dimensions of the #ASR2KHDS03 that you referenced. From the hub face to the trailer frame this setup will give you 8-1/2 inches of clearance for your trailer wheels and tires. (see dimension K on…

Your math is correct in your trailer weight load example. If a fully-loaded tandem axle trailer weighs 4000-lbs then each of the 4 tires will bear 1/4th of that load, or 1000-lbs. In this case a tire rated for 1300-lbs would provide a good safety…