etrailer Class III Trailer Hitch Installation - 2019 Toyota RAV4 Video

We haven't had the opportunity to install the #EH97FR EcoHitch as of yet, but hen we installed the Curt #C13416 on a 2021 RAV4, we found that the inside top edge of the receiver tube sat about 12 inches above the ground, which would place…

The EcoHitch Hidden Trailer Hitch Receiver item #EH97FR will sit 14" off of the ground when installed on your 2022 Toyota RAV-4. I have attached an installation video.

IF you're worried about the Kuat Sherpa #SH22G melting because of the exhaust, I suggest using the Hi-Lo adapter #HL20B. This will extend your rack up/down and out. I really do like the Sherpa and don't think that you'll avoid…

The lightest weight bike rack we have is the Kuat Beta which we have the part #B202-2 for a 2 inch hitch or part #B202-114 for a 1-1/4 inch hitch. This rack weighs 12 lbs which is the lightest option out there. Because of this it would be your best…

To determine the fit of a particular bike rack, you will need to determine how much clearance will be necessary, and then choose the rack that has a shank long enough to provide that clearance. When we installed the Curt Class III Hitch, #C13149 on a…

I do recommend the Kuat Beta bike rack #B202-2 for your 2016 Toyota RAV4. To use this carrier you will need to have a 2 inch trailer hitch. If you need one I recommend #C13149. I have included a link to a video showing an example installation of the…

The fenders on your bikes will actually not be an issue when using the clamps on the Saris SuperClamp EX 2 Bike Rack, part #SA4025F. When a fender is used on the front and/or rear wheel, clamp the hook to the wheel where the fender ends. We also…

The etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish tem #e23ZR for your 2020 Toyota RAV4 weighs 38 lbs.

I recommend the Class III Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit part #DT82QR for your 2020 Toyota RAV4 which is a concealed cross tube design. The hitch will not be completely hidden once installed though. You will see the receiver…

For your 2014 BMW X3 with flush roof rails and two factory BMW side-to-side cross bars the cargo box Thule recommends is their Motion XT cargo box, either the gloss black #TH629706 or the gloss titanium finish version #TH629707. These will fit…

There is a way to install the Thule Motion XT part #TH629706 on your 2019 Toyota 4Runner but since the factory crossbars of your vehicle are so low to the vehicle roof there isn't enough clearance for the clamps of this box to fit without…

From the slot for the PowerClick mounting hardware to the outside edge of the Thule Motion XT Rooftop Cargo Box #TH629707 is going to be 7" (see attached). I was able to confirm this with my contact at Thule.