Installation of Hanger Brackets and Springs for Tandem Trailer Axles
Question:
i went to a trailer supply and ask for weld on brackets for tandem wheel trailer that we are building her gave me 4 hangers that were like 2 that was for the front spring for both sides and back springs for both side for the middle hangers he gave me two that were 3inch long or more the axles and the equializer dont look right .. but looking at all other trailers its only like an 1inch 0r 1-1/2inch off of where the other trailers are when no load on them..and what the pictures i have seen of what they should look like..i hope what i said makes cents to yall..
asked by: Richard W
Expert Reply:
It is not uncommon for the trailer hangers on a tandem axle trailer to be all the same size or for there to be different sizes that can be 1-1/2 to 2 inches different in height when you compare the center hanger to the front and rear. For example, the Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 4-1/2" Center # APT8 has that 2 inch difference in size. I've attached an article on suspension to help further as well.
You will want to make sure you position your axles properly and space your hangers correctly as well.
I've attached a photo of typical dimensions used for 3,500 lbs axles and hanger locations.
Products Referenced in This Question
Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 4-1/2" Center
- Trailer Leaf Spring Suspension
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Tandem Axle
- etrailer
more information >
Product Page this Question was Asked From
6-Leaf Double-Eye Spring for 4,500-lb Trailer Axles - 26" Long
- Trailer Leaf Springs
- Double Eye Springs
- 4500 lbs
- 1-3/4 Inch Wide
- 6 Leaf
- 26 Inch Long
- Painted
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 4-1/2" Center
- Article: Double-Eye Trailer Suspension System Review
- Q&A: Placement of Front and Rear Hangers When Building a Tandem Axle Trailer
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
- Shop: Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs - 2-1/4" Links
- Shop: Tandem-Axle Trailer Hanger Kit for Double Eye Springs - 3-1/4" Tall Front/Center/Rear
- Article: Where to Position the Trailer Axle?
- Shop: Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear, 3-5/8" Center
- Shop: 6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long
- Shop: U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts
- Search Results: 7000 lb leaf spring
- Video: Review of etrailer Trailer Leaf Spring Suspension - Spring Mounting Hardware - APT8
- Q&A: Hanger Spacing Needed for Single Axle Trailer with 25-1/4 inch Long Leaf Springs
- Search Results: trailer jack
- Q&A: What is the Overall Width and Diameter of a 235/80R16 Size Tire
- Video: Review of Lippert Trailer Leaf Spring Suspension - U Bolt Axle Mounting Hardware Kit - LC27XV
- Search Results: 175668
- Search Results: mr66zr
- Search Results: fire extinguisher bracket
- Search Results: hanger kits
- Shop: Trailer Wiring
- Q&A: Tandem Axle Hanger Spacing for Double Eye Springs 25-1/2 Inches
- Q&A: How to Determine Hanger Spacing for Tandem Axle Trailer Suspension with 26 Inch Springs
- Video: etrailer Trailer Suspension - Leaf Spring Suspension - AP233-H248 Review
- Search Results: trailer light kit
- Q&A: Where To Place the Leaf Spring Hangers On a Tandem Axle Trailer
- Video: Review of etrailer Trailer Leaf Spring Suspension - 6 Leaf Double Eye Spring 7000 lbs Axle - e64SR
- Q&A: Spring Hanger Spacing for the Hanger Kit # APS1 with PR4B Springs
- Video: Review of MORryde Trailer Leaf Spring Suspension - Spring Mounting Hardware - MR46ZR
- Shop: Tonneau Cover
on Trailer Leaf Springs
