etrailer Gooseneck Coupler Handle Review Video

It definitely looks like you have Peterson Lights. With that being said, I do suggest measuring your lights to make sure the #2250R will be the correct one. This will measure 2-1/4 inches long, 1-1/4 inches tall, and 3/4 of an inch thick.

The large round washer included with the #BLTL-51 measures 2 inches in diameter, the inner diameter is 13/16 of an inch and the washer is .139 thick. I'll provide a photo showing these dimensions.

The physical difference in terms of appearance between various well-known gooseneck coupler manufacturers is hard to spot because they all are fairly similar. The biggest difference comes with the width of the coupler flange. The best way to…

I have some information that will help but the Blaylock EZ Lock Gooseneck Coupler Lock, #BLTL-50, is not tested on specific brands of trailers. This lock was designed to fit a gooseneck coupler like the Pro Series, #PS0287820300, which I have…

I'm happy to help. You can use the Trailer Wiring 7-Way Upgrade Kit #HS381-9000 to connect your trailer lighting. You can use the attached diagram to help you with color and function on the trailer side. I recommend using the 12 Gauge Black…

Trailer Wiring 7-Way Upgrade Kit #HS381-9000 allows a trailer's existing 4-pole, 5-pole or 6-pole wiring to be re-formatted to the 7-way RV standard to match the 7-way socket on your Silverado. The kit includes a male trailer plug and cable,…

I went out to the warehouse to measure the studs on the junction box that comes with Trailer Wiring 7-Way Upgrade Kit #HS381-9000. The studs are 3/16 inch. The kit does also include the appropriate size nuts as well as 3/16 and 1/4 ring terminals.

You are 100% correct! The closest match and best option to upgrade your 7.50-16 LT bias ply tires, is going to be an ST235/85-16 radial tire, like the Kenda Karrier #AM32743B you were checking out. This tire is pre-mounted on a 16 inch diameter by 6…

The easiest way to cut the oval hole for the Rubber Grommet, #a70gb, in my opinion, would be to use a Light Mounting Bracket for 6-1/2 inch Oval Trailer Lights, BK70BB, as a template and then use a hole saw the correct size to cut a hole on each end…

I reached out to the company that builds the Ram Gooseneck Coupler item #GCSQTW-30008 , Pacific Rim International Factory, and was not able to get an exploded parts diagram. I have listed all of the replacement parts below that are available.…

I took a few measurements for you that I think will help. I have attached a diagram and made a short video for you showing the dimensions and the light. I believe this light will work with your bumper without having to cut out a hole in the back of…

I spoke with my contact at Dexter and he said the Bolt Pattern on Mobile Home Hub & Drum Assembly #8-174-5UC3 is 5 on 10-1/8". I have included links to a video review of this hub and drum assembly and a FAQ article about how to determine…