bing tracking image
Summer Starts Here - Save up to 70%
SAVE NOW
Customer Service My Orders
Q & A Icon

Recommended Junction Box Installation For LED Lighting And Break Away Kit  

Question:

I would like to upgrade my 1981 Miley 2 Horse bumper pull trailer with LED lights and redo some of the wire. I would like to use a Junction Box. 4 of my side markers only turn on when the headlights are turned on so Im not sure where to wire them into the Junction Box. I already purchased my LED lights from you guys. I just need to know if this Junction Box will work and what wire I should buy. I currently have a Bargman Breakaway switch and need to know how to wire that into the Junction Box. Thanks in advance.

1

Helpful Expert Reply:

I'm happy to help. You can use the Trailer Wiring 7-Way Upgrade Kit # HS381-9000 to connect your trailer lighting. You can use the attached diagram to help you with color and function on the trailer side. I recommend using the 12 Gauge Black Primary Wire - per foot # 12-1-1. You can use ring terminals # DW05705-1 and butt connectors like # DW05745-10.

You can use 16 gauge wire like # 16-4B-1 along with ring terminals # DW05737-1 and butt connectors # DW05744-5.

Your side markers should be connected to your running light/tail marker terminal in your junction box. The breakaway battery should be wired to your 12V terminal and your break away switch should be wired to your brake controller terminal.

expert reply by:
1
Jason S
click to enlarge
Ask The Experts a Question >>

Products Referenced in This Question







Product Page this Question was Asked From


Featured Help Information

Miscellaneous Media

Deka Wiring 16-4B-1 Review
Deka Wiring 16-4B-1 Review - Video
Deka 12 Gauge Black Primary Wire Review
Deka 12 Gauge Black Primary Wire Review - Video
Deka Heat Shrink Butt Connectors Review
Deka Heat Shrink Butt Connectors Review - Video
Q & A Icon

Continue Researching

See More Q&A Expert Answers >>