Recommended Bearing Buddy Bearing Protectors for 1.97 Inch Hub Bore
Question:
I just measured my hubs with a caliper. 1.97 in. I would like 2 bearing buddies, do you have this size at your Springhill Fla. store?
asked by: Don
Expert Reply:
The closest match we have to the 1.97 inch measurement you took on your hub bore is with the Bearing Buddy Bearing Protectors # BB1968SS. These are designed for 1.968 inch hub bores so they should work well on your trailer. The .002 inch difference is just going to allow for a slightly easier fit. These stainless steel bearing protectors will resist corrosion and do a great job of keeping water and dirt out of your hubs and bearings.
I have attached an installation video for this product that you can also check out. We are currently based in Wentzville, MO and do not have any Florida locations, however we can ship directly to your doorstep!
Product Page this Question was Asked From
Bearing Buddy Bearing Protectors - Model 1968SS - Stainless Steel (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.968 Inch
- Bearing Buddy
more information >
Continue Researching
- Q&A: Which Grease Cap Fits Dexter Trailer Hub and Drum Assembly for 8,000-lb E-Z Lube Axles
- Q&A: Bearing Buddy Bearing Protectors For a 1.96" Hub Inside Diameter
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Parts Needed To Install Electric Drum Brakes On a PWC Trailer With 3,000LB Axle
- Q&A: Replacement For A Reliable ACT 7.5 KS Brake Actuator
- Q&A: Replacement Actuator for UFP A-60 34044
- Q&A: Fit of Phoenix USA Hub Cover on 8 Lug Wheel With 5/8 Inch Wheel Studs
- Article: Most Popular Wheel Bearings
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Maintenance Schedule
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: 7 Common Questions Everyone Has About Trailer Tires