Curt Wheel Chock Set Review Video

The L-brackets of the Reese weight distribution system #RE44FR need to install between 24.5 and 27.5 inches from the hitch ball center. I attached a picture that I took from the instructions that shows this. The range gives you a bit of flexibility…

There are a few different ReCurve R3 weight rating options available so I don't know exactly what system you have and if it's properly rated for your trailer with just that info. Your old trailer was rated to weigh up to 4,400 lbs and your…

It is best to use a set of wheel chocks either between the inside tires or in front and behind of the outside tires but I would definitely use more than one per side. That said, I recommend the Buyers Products Heavy Duty Wheel Chock part #337WC0888…

The Brophy Ball Mount for 2" Hitch part #BH20 weighs around 17 lbs. If you're looking for a lightweight option we offer the Brophy Ball Mount for 2" Hitch part #EA20 which only weighs around 5 lbs.

I would be happy to recommend a ball mount for your Ram 1500 4WD with air bags installed, but the correct ball mount is really going to come down to how much of a rise/drop you need to tow your trailer level. To determine the rise/drop you need you…

The quick disconnect fittings are the same and is an industry standard. The difference between the Camco Quick-Connect Full Flow Plug for Low Pressure Propane Systems part #CAM59903 and the MB Sturgis Quick Disconnect Propane Adapter Fitting part…

Your pictures show two 3/8 inch female flare fittings. In which case the correct 12 foot long hose you need is part #100041-144-MBS.

You'd need a drop of right at 1 inch to tow the trailer you mentioned level based on the dimensions you listed. The closest to that is a 2 inch drop ball mount like the part #C45331 which fits a 2 inch hitch like you have as well. It has a towing…

The Reese Weight Distribution Systems like part #RE44FR all come with a standard length shank which won't allow the tailgate to be opened with the trailer attached. That said, we do offer longer shanks which allow for this but they must be…

Yep, you have the exact right part to add sway control to your Reese Pro Round Bar Weight Distribution #RE44FR, which is the friction kit: - Reese Friction Sway Control Kit #83660 This will definitely help with the sway you are experiencing, comes…

Yes, you can add friction sway control to your Reese Pro Round Bar Weight Distribution #RE44FR, and Reese recommends this is exactly what you should do to improve the sway control (just keep in mind friction sway control cannot be used on trailers…

I reached out to my contact at Reese and the Replacement 1/2" Hardened Washer for Reese Weight Distribution Systems #3306 you were looking at are the correct washers to adjust the hitch ball angle on your Reese Pro Round Bar Weight Distribution…