Curt Hitch Cargo Carrier Review - 2013 Hyundai Elantra Video

I have a different type of "enclosed" carrier which might be an option and would work well for you, but there isn't an adapter for the Rola part #59109 that would allow it to sit higher. Check out the 24x48-3/4 Carpod Walled, Folding…

We have cargo carriers that would work on your 2013 Hyundai Elantra GT, but since the hitch you would have installed would be a Class I hitch there are no folding options I can recommend. The Class I compatible carriers we offer like the part #C18110…

The Curt trailer hitch mount cargo carrier #C18110 has a shipping weight of 42 pounds but the actual carrier weighs approximately 38 pounds. That would leave you with 162 pounds you could put on the carrier loaded on the trailer hitch on your 2013…

The extra clearance certainly could not hurt. However you will want to consult your Prius owners manual because we have found that Toyota says not to install a trailer hitch on them. You will want to check with the Corolla as well. Both vehicles will…

Because the ride height of your 2003 Camry is low and because of the angle of the road/driveway it would be best to use a trailer hitch mount cargo carrier that does have a rise in the shank such as #C18110. I do not recommend a straight-shank…

You need the Swagman Replacement 1-1/4 and 2-Inch Shank for Swagman XC Series Bike Carriers, part #P306. This will allow your older XC hitch rack to remain in service in both 1-1/4- and 2-inch hitch sizes, thanks to the kit including an adapter…

I went and pulled a Replacement Threaded Hitch Pin and Clip #P5902 from our warehouse and measured the bolt head and found it to be 3/4 of an inch while the diameter of the washer is 1.16 inches.

In order to use the Swagman XC Hitch or RV Bumper Mount Rack, #S64663, with the 1-1/4 inch on your 2012 Ford Fusion you will need a hitch adapter like the Brophy, #HTAD. Please do keep in mind that using an adapter reduces the tongue weight capacity…

It sounds like you need the Replacement 1-1/4 inch and 2 inch Shank for Swagman XC Series Bike Carriers #P306. This product can be used on older model Swagman XC bike racks that originally only were designed for 2 inch hitches to allow them to be…

I do have an option for you for extra storage but the owners manual on your 2010 Hyundai Elantra does not recommend using that vehicle for trailer towing. A lot of people still do it but it is not recommended by the vehicle manufacturer and could…

I pulled a Sportframe Drawbar, part #3594, from our warehouse and took a measurement for you. As the attached photo shows the distance from the end of the shank that inserts in the receiver on your Kubata RTV to the center of the hitch pin hole is…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…