Curt Heavy Duty Forged Ball Mount Review C43JR Video

Hey Michael, thanks for reaching out! The EcoHitch #EH57FR sits a little higher than the Curt #C52NR so it will give you better ground clearance for your 2024 Chevy Silverado 2500. The EcoHitch is a bit more recessed into the front bumper than the…

To add a front mounted hitch to your Chevy 2500 you will want the EcoHitch From Trailer Hitch item #EH57FR. This hitch is custom fit and and bolts to your truck with included hardware. I checked with EcoHitch and this hitch will fit the Duramax…

The best fit front mount trailer hitch we have for your 2012 Toyota Tacoma 4x4 is the Draw-Tite Front Mount Trailer Hitch Receiver part #65070. The reason that this is the best fit trailer hitch is because it allows you to retain the skid shield…

I do have both front mount hitch and grille guard options for your 2017 Toyota Tacoma TRD Off Road but as you mentioned they cannot be used together and I am not aware of any grille guards that have an integrated receiver tube. Therefore, you will…

I can help you try and figure out why your Dexter Nev-R-Adjust Electric Trailer Brake Assembly like parts #23-465 and #23-464 are locking up and there are a multitude of reasons. When this happens it is often an electrical issue or the brake magnets…

The Gen-Y Pin and Clips are available as part #325-GH-096 for a 2" hitch and part #325-GH-099 for a 2-1/2" hitch, but the clips are not available separately. We do have standard pins, like the Curt #C21600 which fits both options, but none…

The diameter of the ball hole of the Curt ball mount part #C43JR is 1-1/4 inch. We also have this available without a hitch ball with the part #C45458.

The Curt Trailer Hitch #C15810 is confirmed to fit your 2006 Ford F-250 and has a maximum gross trailer weight up to 20,000 pounds and has a maximum tongue weight up to 2,700 pounds. You're only as strong as your weakest component so even the…

The BulletProof Hitches 2-Ball Mount #ED308 only lists the maximum trailer weights on the sticker placed on the shank. They do not list the vertical load rating on the body of this hitch nor do they provide any certificates with the receiver. I do…

I can confirm for you that the B&W Tow & Stow 2-Ball Mount will fit a factory 2-1/2" trailer hitch receiver on a 2020 Ram 3500. This has capacities of 7,500 lbs with the 2" ball or 18,000 lbs with the 2-5/16" ball, and a…

I have a solution for you, but the small pin included in InfiniteRule Locking Pins for B & W Tow and Stow 10K and 14.5K Ball Mounts - Qty 4 #34061775-D is not long enough to work well with a 3" receiver. Instead, I recommend going with the…

If the 690 lb tongue weight is the weight when the trailer is loaded then your current Centerline would work great. If that's an unloaded figure though you'd most likely be over capacity and it wouldn't be effective. The best solution…