Curt Hitch Mounted Cargo Carrier Cargo Bag Review Video

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

We do have an inexpensive folding cargo carrier that would work perfectly for you, the #C18151 from Curt. This carrier, at 20x59 is actually a bit larger than the Rola carrier you mentioned, and it's considerably less expensive. You will need to…

You could pretty easily attach your license plate to the mesh flooring of the Curt Cargo Carrier part #C18151 by using zip ties so that it would be visible when folded up. In the folded up position the taillights should still be visible if they were…

There really isn't a great way to accomplish what you are trying to do. The dual hitch receivers like the part #D-192 cut the capacity of the hitch they are installed in by 50 percent and add quite a bit of leverage to the hitch. I really…

Typical golf bag dimensions are 50 x 12 x 10 inches, respectively. Based on that you should have no problem carrying two sets of golf clubs and other associated gear with the Yakima RocketBox Pro 14 Rooftop Cargo Box #Y07192 that you mentioned.

The metal rings that come with the etrailer Cargo Bag w/ Mounting Straps #988501 are for use if you have pre-drill mounting holes in your cargo carrier. Attached is a photo showing what the application would be.

Beginning with the introduction of the 2007 model year, GM stopped using the connector that was located in the convenience center under the dash for installing a brake controller. Instead, the tow package connection consists of 4 or 5 wires bundled…

The Champion 4,500-Watt Dual Fuel Portable Inverter Generator #CH44FR is 61 dB when measured at 23' away at 1/4 load. We do not carry the Honda generators but from what I could find a Honda 3000 generator is 50-57dB noise level at 1/4 load.

On your 2019 Mazda CX-9 there is a factory port behind the passenger side trim panel that accepts a custom 4-Way trailer harness plug. If this is what you are referring to when you mentioned that your vehicle has the trailer ready connector, then you…

The 24x60 Curt Cargo Carrier for 2" Hitches Steel #C18152 will not cause any exhaust heat-related issue on your 2014 Toyota Highlander. This carrier has a 2-1/2" shank rise which will move the carrier above the factory exhaust location. The…

You can use Curt trailer hitch mount cargo carrier #C18152 on the back of your RV to carry your generator. You will want to avoid models that fold up because folding models have additional points of movements that could possibly fail due to the…

The 3 inch dimension that needs to be cut from the rear bumper to install the etrailer.com hitch part #E98848 that you referenced is measured from the edge of the fascia and matches the angle of it. So the square cut would measure 3 inches. If you…