BulletProof Hitches 2-Ball Mount Review ED254 Video

Any type of hitch adapter or extender will have the unavoidable side-effect of causing a loss of about half of your hitch's rated capacity, both its tongue weight (TW) and it's gross towing weight (GTW). Hidden Hitch extender #HE18…

The Gen-Y Torsion 2-Ball Mount #325-GH-1824 that you referenced does now come with set screws on the sides of the square openings to allow the movement of the ball and retainer to be reduced. I attached a picture of them for you to check out. The…

It looks like the pin part of the DO45 (which takes the place of a standard hitch ball) has a shank with a 1-1/4" diameter so I recommend using the Curt Heavy Duty Forged Ball Mount #C45340 with a Gen-Y hitch as this ball mount has up to a…

You are correct, the BulletProof website lists different measurements for the #MD206. In fact, this is true for all of their ball mounts. The reason for this is the way they measure which doesn't follow the standard. Rise is the distance from the…

In order to choose the correct ball mount for a truck you really need to have specific measurements on the hitch height as well as the coupler height for the trailer/trailers you'll be towing. That said, we know you'll most likely need a drop…

The only hitch we currently carry that has all 3 ball sizes along with a pintle lock is the Patriot Hitches 5-Way 3-Ball Mount and Adjustable Drop Hitch Adapter #PH94FR. As this is limited in weight capacity to 7,000lbs due to the drop receiver I…

The best option for a hitch lock with the Curt Adjustable 2-Ball Mount - 2-1/2" Hitch - 5-1/2" Drop, 4-1/2" Rise #C79NR is from InfiniteRule: - InfiniteRule Hitch Lock for 2-1/2" Hitches #34061072-D This is a stainless steel hitch…

Yes, the pin hole you're talking about on the Gen-Y 2-Ball Mount for 2-1/2" Hitch Receivers #325-GH-064 is actually there so you can turn the ball mount 90-degrees in the hitch receiver and install the 1-7/8" Bolt-On Hitch Ball…

I have a solution for you, but the small pin included in InfiniteRule Locking Pins for B & W Tow and Stow 10K and 14.5K Ball Mounts - Qty 4 #34061775-D is not long enough to work well with a 3" receiver. Instead, I recommend going with the…

I can confirm for you that the B&W Tow & Stow 2-Ball Mount will fit a factory 2-1/2" trailer hitch receiver on a 2020 Ram 3500. This has capacities of 7,500 lbs with the 2" ball or 18,000 lbs with the 2-5/16" ball, and a…

The InfiniteRule Locking Pins for B & W #34061775-D would be the lock set you would want if you have the B&W Tow and Stow because it will provide you with a lock for each pin location on the hitch. If this is not the B&W hitch that you…