Adjustable Ball Mount With 1-7/8", 2", 2-5/16" and Pintle Lock Capabilities

Question

Question:

Do you guys carry a hitch with a three way adjustable ball that also has a pintle lock as well?

asked by: Jerry

1

Helpful Expert Reply:

The only hitch we currently carry that has all 3 ball sizes along with a pintle lock is the Patriot Hitches 5-Way 3-Ball Mount and Adjustable Drop Hitch Adapter # PH94FR. As this is limited in weight capacity to 7,000lbs due to the drop receiver I have a better option for you.

The BulletProof Hitches system will allow you to have everything you are looking for with their easy to change removable accessories. First you can select a ball mount system.

BulletProof Hitches Adjustable 2-Ball Mount for 2" Hitch # ED208
BulletProof Hitches Adjustable 2-Ball Mount for 2-1/2" Hitch # ED258
BulletProof Hitches Adjustable 2-Ball Mount for 3" Hitch # ED308

With any of these you are getting an 8" drop mount with a 2" and 2-5/16" hitch ball. A Pintle Lock # 358Pintleattachment can be used with any of these ball mounts giving you the ability to attach to a Lunette ring with the 2-5/16" hitch ball. And the 2-Ball Platform # 358178ball will give you an additional 2-5/16" hitch ball along with a 1-7/8" ball in the instance you need the smaller ball.

expert reply by: Bud M

1

Answer 1

If you are looking for a down hitch that includes the lunette ring itself, we unfortunately do not carry one of those models. However, your best option is to use a shank like the BulletProof Hitches Adjustable 2-Ball Mount for 2" Hitch -…

view full answer...

Answer 2

We've checked with Bulletproof and Curt before and the channel dimensions are the same between the Bulletproof ball mount channels and the Curt #C45922 so they would work perfectly together.

view full answer...

Answer 3

To apply grease to the top of a hitch ball with the part #58117 all you would need to do is apply a small amount to the top of the ball. The coupler will then push the grease around and spread it evenly on the ball.

view full answer...

Answer 4

That's weird, the 7-Way Vehicle Power Adapter for Furrion RV Observation Camera #FR87PR should allow you to use your camper at the same time as that's what it's designed for. If you want to just avoid the adapter all together,…

view full answer...

Answer 5

The thickness of the wall of the 7,000 lb-rated Patriot Hitches Adjustable Drop Hitch Receiver Adapter - 2" Hitches - 11" Rise/Drop #PH67SR is 3/16".

view full answer...

Answer 6

I went out to the warehouse and pulled the Convert-A-Ball Dual-Cushioned, Adjustable Ball Mount, #CAB-UM, and took some measurements for you. The most critical measurement is going to be the measurement from the center of the hitch pin hole, to the…

view full answer...

Answer 7

We have yet to see any OEM camera on any pickup that is compatible with a Furrion system on the RV so you will need to use a Furrion camera system to utilize the wiring on your RV. I recommend going with the 5" Monitor #FOS05TASF because you can…

view full answer...

Answer 8

Your ST205/75R15 trailer tire features a Load Range C which, according to the tires we have available in this size such as the Provider #TTWTRTM2057515C, gives it a maximum load of 1,820 pounds at 50 psi. If you can tell me what specific brand tire…

view full answer...

Answer 9

First you need to know that the use of an adapter to extend, reduce, raise, or lower the receiver will reduce the tongue weight capacity by 50 percent. So if the motorcycle rack you have is completely supported by the trailer hitch then the combined…

view full answer...

Answer 10

The Curt CrossWing Lightweight Gooseneck-to-5th-Wheel Trailer Hitch Adapter part #C32DR and part #C92DR are the exact same. This hitch is designed to attach to a gooseneck hitch and provide a connection for a fifth wheel hitch. Therefore, if you have…

view full answer...

Answer 11

The best and only option we have that covers everything you need is the Curt Pintle Hook Combo part #C45908 which fits the 2-1/2 inch hitch size, has a 2-5/16 inch hitch ball, is adjustable in height, and has a 20k capacity.

view full answer...

Adjustable Ball Mount With 1-7/8", 2", 2-5/16" and Pintle Lock Capabilities

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching