Can the Erickson ATV E-Track Tie-Down Kit EM09160 Wheel Chocks Be Split Across Axles  

Installing the E-Track Trailer Cargo Control, part #EM59150, would work well to strap down your ATVs and motorcycles on your V-nose trailer. You could mount the E-Track sideways or perpendicular to the trailer frame over the floor as you described.…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

The etrailer E-Track Roller Idler #e67HR is 3" from the top of the e-track to the bottom of the roller.

Since the slot dimensions and capacity of different brands of E-Track are identical, really the only differences are the finish and the lengths the tracks are sold in. If you're using the E-Track in an area where aesthetics are important, you can…

The safest way to secure a 4-wheeled vehicle like a golf cart in a truck bed is to use wheel nets that secure to the truck bed in some manner. The Erickson E-Track Tie-Down Kit #EM09160 is one option that is similar to the Pack 'Em kit you…

The closest thing to a replacement for the straps that come with the #EM09160 are the Erickson E-Track Strap with Ratchet #EM59136. These are a bit longer at 12' and have a max load of 3,500 lbs with a safe working load limit of 1,165 lbs. The…

Your Dometic Sunchaser Model 834EH15.401 is 15' x 8' so to replace your fabric I recommend the following: - Replacement 15'1" Fabric for 16' RV AwningSand Fade w/White Weatherstrip #LCV000334399 This fabric is compatible with…

Erickson has the spacing for the mounting holes of the #EM09160 before and after the chock at approximately 4-3/8" center to center. Since they unfortunately do not offer a custom backing plate the #e96RR you purchased is going to be the closest…

The Erickson ATV E-Track Tie-Down Kit #EM09160 is intended to secure your trailered 4-wheeled vehicle at the rear tires. The chocks are to be mounted in front of and behind the rear wheels as shown in the linked video and photo. If they were…

The correct screw/bolt size for the Erickson ATV E-Track Tie-Down Kit #EM98CV is 1/4". The best hardware will depend on your exact application and the material and thickness you're attaching these too. If your mounting surface is no more…

You want at least 6 inches between the overhang of your gooseneck trailer and the bed rails of your truck. Thanks for sending in a picture of your tow setup. You definitely need to get the nose of the trailer down so that it can be level.