Blue Ox Adjustable Ball Mount with Clamshell Review Video

The Blue Ox Adjustable Ball Mount #BLU89XR has a distance of 4-11/16" from the center of the furthest receiver hitch pin hole to the weld on the tube. The shorter hole is 3-7/16" from the center of the receiver hitch pin hole to the weld on…

I spoke with my technical contact at Curt and he informed me that the Curt Hitch #C15810 will fit spare tires with a wheel size of less than 20 inches. We happen to have a Ford F-350 on site, so we checked out the spare tire underneath and it was a…

Your 2024 Chevrolet Silverado 3500 will come with a 2-1/2" trailer hitch receiver. If your truck did not come with a reducer for a 2" receiver we do have the B&W #BWRHXA2182 if you need to use your 2" ball mount or hitch mounted…

Since hitch pins don't typically carry the weight of a trailer they are not weight rated. Normally it's the tongue weight of the trailer that pins the ball mount to the hitch tube which keeps it in place and not the hitch pin. This is not…

Yes, in order to prevent the adjustment pins part #BWTS35010 from being stolen on your B&W Tow & Stow 2-Ball Mount part #BWTS10037C you are going to need a hitch pin lock that has a 5/8" diameter and at least 4-1/2" span. For this,…

The Roadmaster Comfort Ride Shock Absorbers for Tandem Axle Trailers - 8,000-lb Axle #RM-2470 comes with the adjustable mounting brackets and hardware included. The tie plates included will replace your existing u-bolt tie plates but you will reuse…

The closest option we have available to what you are needing is the Blue Ox Trailer Hitch Receiver Lock #BX88212. This heavy-duty lock features a 5/8 inch diameter and a usable length of 4-3/8 inches. This usable length represents the longest option…

We do carry the Replacement Inner Member #DX99FR that fit the Dexter DX7.5L A-60 Brake Actuator #DX56FR and Legacy UFP brake actuators. This would allow you to replace just the inner portion of your current actuator as long as yours is one of the…

This does happen every now and then, but you will need the Dexter Replacement Emergency Breakaway Cable Kit #DX64XR. This is specifically for the A-60 actuators, which the #DX56FR is. With that said, on the bottom or underneath side of the inner…

I don't believe we have an exact match but we do have pins that you could potentially retro-fit to your trailer such as #F719-182Z104. The benefit of this design is that you can't lose the pins. I have included a link below to this and other…

The Andersen Ultimate Connection 5th Wheel Trailer Hitch System with Adapter - 20,000 lbs #AM3200 will use the following tools for initial installation: 1/4" Allen wrench 5/16" socket for self-tapping screws Measuring Tape Torque Wrench…

Using a Hitch Sleeve Reducer #BWRHXA2182 or #BWRHXA2183 will not reduce the capacity of your receiver. You will need to ensure you do exceed the weight capacity of the ball mount or other hitch mounted accessory that you are using. A sleeve like the…