Trailer Hitch Installation - 1999 Ford F-350 Super Duty - Curt Video

I spoke with my technical contact at Curt and he informed me that the Curt Hitch #C15810 will fit spare tires with a wheel size of less than 20 inches. We happen to have a Ford F-350 on site, so we checked out the spare tire underneath and it was a…

Yes, the #TLR3503 are the correct rear tie downs for your 2016 Ford F-350 with the 6-3/4 foot bed, cab length running boards, and your recently installed TorkLift 20K SuperHitch Original #TLF1002. For the front tie downs, the correct part number is…

On your 2017 Ford Escape you can best remove the hardware from your frame by basically reverse installing the hitch. This would include using the fish wire to keep track of your bolts to ensure they don't remain in the frame. If you were to lose…

The Torklift SuperHitch Magnum #TLF1002-30 weighs 140-lbs; I'm not sure how much the factory hitch weighs, but I'm guessing that it's likely around 40-50lbs. If you're having issues with sag on your 2000 Ford F-250 then you might want…

The TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers #TLE1536 that you referenced weighs 70 lbs.

A trailer hitch receiver can not be modified to increase the maximum tongue weight rating of the trailer hitch receiver. Modifying the receiver will void the manufacturer warranty and could cause a safety issue. For example the Curt Trailer Hitch…

The drop of the Curt Class V #C15810, which is the distance from the top of the hitch crossbar to the underside of the vehicle frame where the hitch mounting flanges attach to the vehicle is 5.63 inches. The distance from the face of the receiver to…

I recommend the Equal-i-zer Weight Distribution System #EQ37140ET. Using this system you will also get sway control to make things much safer when you are driving. This system is rated for a tongue weight of 1,000-1,400lbs and a maximum trailer…

I checked with Curt and they sent me the following dimensions based on your picture for the #C15410. Red line measurement 10.55” Yellow Line measurement 5.32” Green Line measurement is 7.5”

Your Curt #C15316 is for the deep drop bumper and has a measurement of just over 9 inches according to my contact at Curt. He said the #C15410 is 5.32 inches from the frame to the top of the crosstube and they don't have anything in between those…

There is a weight distribution hitch option for your new 2021 Intech Flyer Discover with a completely covered A-frame. Instead of using a standard weight distribution hitch which has brackets that go around the frame you will need to use a weight…

For your 28' enclosed trailer I recommend the Furrion Chill HE RV Air Conditioner System - Single Zone - 15,000 Btu - Black #FR23PV. If the ceiling of the trailer isn't too high and you can reach the air distribution box and don't want to…