Wheel Masters 4-Hose Inflation Kit Installation - 2022 Jayco Alante Motorhome Video

We have valve extenders for your dual wheel tires. I recommend the Wheel Masters 4-Hose Inflation Kit - 16" to 19-1/2" Dually - Wheel Cover Mount #WM8208. The length of the hoses with straight valve extenders is 13 inches. I've attached…

Thanks for the pictures, I can see why you're concerned now. It looks like you have some 135 degree valve extenders that just aren't quite long enough to pass through the hand holes of the wheel cover. You could try using a longer 180 degree…

Best option would then be to try contacting a Chevy dealer to see if they could possibly look it up online. Due to the age of the vehicle there isn't any info I can find for it. If the truck has a 454 cubic inch engine it looks like it may have a…

For your 2014 Ford F-250/350 Super Duty you will want to use Wheel Masters 4-Hose Inflation Kit part #WM8001. The bend on the Wheel Masters 4-Hose Inflation Kit part #WM8001-135 causes the hoses to be in contact with your rim as soon as it comes off…

For wheels with smaller hand holes like your setup has we know the Wheel Masters 4 Hose Inflation Kit #WM8001-135 would work well. Check out the attached picture and you can see them installed on a similar style wheel.

The overall length of the hoses that come with the Wheelmaster Inflation kit part #WM8009 is 7 inches.

Yes, the Wheel Masters 4-Hose Inflation Kit #WM8001-135 that you referenced does fit your 2018 Ford F-450 dually. I checked the wheel size of your vehicle (19-1/2 inch diameter) and found that it uses the correct size to use this kit.

I believe the 2022 Ford F-450 Super Duty has 19.5" wheels, verify this for your vehicle. I suggest the Wheel Masters 4-Hose Inflation Kit, #WM8001 which is for wheels up to 19.5".

When you use the Wheel Masters 4-Hose Inflation Kit #WM8208 on wheels that have covers you will have the brackets clamp to sides of rear wheels before wheel covers are installed. Basically you would install the clamp and then install the wheel cover…

When installing the end link kit part #RO57FR you do sometimes need to use a 1/2 inch drill bit to enlarge the holes on the sway bar. You do need to make sure you are using a drill bit designed for metal and not softer materials as they won't…

What vehicle are you needing this for? It looks like you have a 2019 Ford E-Series in our fitguide but if you could let me know if it's an E-350 or E-450 and whether you have a Class A motorhome, Class C motorhome, or an Emergency Vehicle I can…

There are two ways to mount the Wheel Masters Inflation Kit, #WM8001. You can use the pop rivets to attach the L-brackets to the hub cover or you can use the flat brackets to attach them to an axle housing bolt. These are not a vehicle specific item…