Wheel Masters Tire Pressure Valve Extenders Review Video

We have some kits like the Wheel Masters 4-Hose Inflation Kit #WM8001-135 that essentially extend the valve stems out so they're easier to access, but we don't do any kind of work on valve stems. These are compatible with a TPMS kit as well…

The Wheel Masters Tire Pressure Valve Extenders #WM8029180 you referenced will work great. They come in a set, one for each inner wheel. They thread directly on the valve stem of your Mercedes Sprinter 3500 motor home and extend it out to reach…

The Air Lift LoadLifter 5000 Ultimate Air Helper Springs #AL88295 is the best choice in air bags to help stabilize your load. These air bags are going to reduce the strain on your rear suspension. They're going to help increase safety and…

With having the Wheel Masters 4-Hose Inflation Kit #WM8001-135 I recommend using a TPMS system like the TST with either 4 #TST34FR or 6 #TST-507-INT-6-C internal tire sensors. The internal sensors will provide a more accurate reading for the air…

Items like the Wheel Masters 4-Hose Inflation Kit #WM8001-135 are not something that we can determine just from your motorhome information. The correct kit is going to be determined by the wheels/tires you have on your motorhome. For instance the…

The Wheel Masters Airless 2-Hose Inflation Kit WM80092 you mentioned is designed for 16" wheels while the Wheel Masters 2-Hose Inflation Kit #WM8005 is for 22-1/2" wheels so the 80092 would be my recommendation if it wasn't a…

When using the TireMinder i10 TPMS for RVs #TM29FR, it is recommended to not use valve extenders. Obviously this is not always possible. But the manufacturer does state that if you do need extenders, you should use straight extenders that are steel…

As long as the wheels on your 2013 Ford E-350 are 16 inches in diameter hub cap wheels, have 8 lugs, and are not a Budd or split rim the Namsco Wheel Covers #NA7160B0 would work well for you. Check out the review video I attached.

Yes the Wheelmaster valve extenders like the #WM80294 can be left on when driving. They are designed to be a permanent so they would be perfectly fine to be left on. If you were going to use them with a TPMS sensor you'd want to use a sensor that…

Yes, the Wheel Masters Tire Pressure Valve Extenders #WM80294 are compatible with thread on tire pressure monitor sensors. The treads of the extenders are also long enough to be used with the brand you have as well.

Usually 45-deree valve extenders like the Wheel Masters #WM8029 which you referenced are the best bet but we also have 135-degree extenders #WM8029135 for when a sharper bend is needed. Another way to go is the Wheel Masters 4-Hose Inflation Kit…

Since your wheels have hand holes the style of valve stem extenders you'd want are the Wheel Masters Airless 2-Hose Inflation Kit #WM80092 since this kit is the style that was designed for your wheel style. The kit you mentioned fits a hub that…