Braided steel hoses take the hassle out of inflating and checking the air pressure of the tires on dual wheels. Kit is designed for rear wheels. Hardware included.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody, Andy here with etrailer.com. And today, we're gonna take a look at this TireMinder 4-hose Inflation Kit. These braided steel hoses are going to take the hassle out of inflating and checking the air pressure of your tires on your rear dual wheels by relocating your inner tires valve stem to your outer wheel. So what that means for you is no more crawling on the ground or reaching for valve stems on your inner tire. Now this kit is designed for your 22-inch and larger tires that are mounted on steel or aluminum rear wheels with the rear line, with the wheel liners rather. And this is going to be a simple installation.
You're going to install two of the included brackets on the hub of each outer wheel, and you wanna make sure to align the brackets with the valve stem and hand hole. And then you're going to attach the hoses with the straight valve extenders to the valve stems on the inner tires. And then you're going to attach the hoses with the 90-degree angled extenders to the valve stems on the outer tires. And then you're going to run the hoses to the outer wheels and attach the hoses to the hub-mounted brackets. And then finally, you will want to screw on the included valve caps.
Now the braided steel construction is very durable, and that's going to prevent these hoses from cracking or leaking. And let me go ahead and retrieve my tape measure here and just give you some overall measurements. Beginning with the measurement of our straight hose, we are sitting right at 15 inches long. And then the measurement of our 90-degree angled hose, we are sitting right at 10 and 5/8 inches long. And you will receive everything that you see here on the table before me.
You're gonna get four hoses and all the hardware you need to successfully install this kit. Well, that's gonna conclude our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.
.
Average Customer Rating: 5.0 out of 5 stars (2 Customer Reviews)
Braided steel hoses take the hassle out of inflating and checking the air pressure of the tires on dual wheels. Kit is designed for rear wheels. Hardware included.Excellent service
Now I can inflate/delate my DRW w/o removing them.
Do you have a question about this Tire Inflator?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.