Braided steel hoses take the hassle out of inflating and checking the air pressure of the tires on dual wheels. Kit is designed for aluminum rear wheels. Hardware included.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody, Andy here with etrailer.com, and today we're gonna take a look at this TireMinder 4-Hose Inflation Kit for aluminum wheels. Now these braided steel hoses are going to take the hassle out of inflating and checking the air pressure of your tires on your rear dual wheels by relocating the inner tire's valve stem to your outer wheel. So what that means for you is no more crawling around on the ground or reaching for your valve stem on your inner tire. This kit is specifically designed for your 22 inch aluminum rear wheels with wheel liners. And this is going to be a simple installation. You are just going to begin by installing two of the included brackets on the hub of each of the outer wheel.
You do wanna make sure to align the brackets with the valve stem and the hand hole, and then you're going to attach the straight valve extender to the valve stems of your inner tires. And then you're going to attach the hoses with the 90 degree angled extender to the valve stem on your outer tires. And then just simply run the hoses to the outer wheels, and attach the hoses to the hub-mounted brackets. And then, finally, screw on the included valve caps, and you'll be ready to go. Now these hoses are constructed of braided steel, so that's going to prevent these hoses from cracking or leaking, and they're going to be very long lasting for you.
And let me go ahead and pull out my tape measure here just to give you some measurements. Beginning with our 90 degree angled hoses, we are sitting pretty close to 14 inches, right about 13 and 3/4 inches long. And then on our straight hoses, we're sitting right at 13 inches long. Now this includes everything that you see here on the table in front of me. You're gonna get four hoses.
And then we talked about the brackets and the caps, and then the rest of the hardware that you're going to need to successfully install this kit. Well, that's gonna conclude our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.
.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.