Trailer Hitch Installation - 2002 Toyota Tundra - Curt - Video

Thanks for reaching out, those factory bumpers are a unique situation but I have a solution or two for you: **Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #13184. *Westin Fey Surestep Rear Bumper - Black Powder Coated Steel…

The difference between a 2000 Toyota Tundra with a towable bumper and a non-towable bumper is that the model with the towable bumper will have a cutout in the center of the bumper for a hitch ball wheres the model with the non-towable bumper will…

The factory towable bumper on a 2002 Toyota Tundra is one that has about a 1" diameter hole drilled in the center of the bumper for a hitch ball. I have attached a photo of a Tundra with and without a factory towable bumper for you to help…

The answer to your question will depend on if you have the actual 'factory' hitch which is incorporated into the bumper brackets or the 'dealer installed' hitch which is just bolted to the frame. If you have the dealer installed…

A factory towable bumper has additional features/bracing to aid in towing that the other option does not. A factory towable bumper on a Toyota Tundra has a hole located in the the bumper for a hitch ball, on the bumper step area in front of the…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

The DeeMaxx Disc Brake Caliper item #DE86VR is not going to fit on 2021 Nitro Z20 bass boat but so long as you have a mounting bracket for disc brakes it will fit on your trailer. These are pretty universal.

On a 2000 Toyota Tundra Curt trailer hitch #13184 frames the spare tire and it can be raised and lowered like normal. The hitch will not interfere with the hitch. If you plan on doing some towing I recommend etrailer ball mount kit #989900. It comes…

I would be happy to help! The blue wire of the Curt Trailer Connector Adapter - 4-Way Flat to 5-Way Flat - Vehicle End #C57187 you were looking at needs to be connected to the reverse light wire on your 2013 Chrysler Town and Country. The connector…

In order to activate the reverse solenoid on the brake actuator you will need to converter the 4-way trailer wiring harness you have to a 5-way using the Curt Trailer Connector Adapter part #C57187. This adapter will then plug into the 4-way on the…

Replacement calipers are brand specific since it's more than just the bracket bolt holes that need to line up. The rotor position relative to the mounting bracket is slightly different between brands so you do need to verify that you have a…

The Kodiak Disc Brake Caliper #KDBC225DAC that you referenced is designed to be a replacement for both the 2k and 3.5k capacity disc brake kits. So in this case there would be no difference.