Trailer Hitch Installation - 2002 Toyota Tundra - Draw-Tite Video

Yes, Draw-Tite trailer hitch #75105 will fit your 2006 Toyota Tundra SR5 with factory towable bumper. I have linked a video showing an example installation for you. If you plan on doing some towing I recommend etrailer ball mount kit #989900. It…

The Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" #75105 is a confirmed fit for 2000-2006 Toyota Tundra models with or without factory towable bumper. It is very possible that the manufacturer used different nut and…

Thank you for the picture of the rear bumper of your 2006 Toyota Tundra. Based on seeing that the Draw Tite hitch part #75105 that you referenced will fit it. I attached an install video for this hitch on a similar Tundra as yours for you to check…

I have a great solution that will fit your 2002 Toyota Tundra regardless of bumper style. The Draw Tite hitch part #75105 is a fit for both styles of truck bumper so it would be your best option.

The answer to your question will depend on if you have the actual 'factory' hitch which is incorporated into the bumper brackets or the 'dealer installed' hitch which is just bolted to the frame. If you have the dealer installed…

The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. You will…

It sounds like something is causing a short circuit in the wiring of the Curt harness you mentioned in your question. I recommend checking all of the connections the harness is making to your vehicle to see if there is anything out of place that may…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The safety chain holes are well hidden on Curt trailer hitch #C13180. There is a part of the hitch above the receiver that attaches to the vehicle bumper. The holes are in that plate. I have included a picture pointing them out.

I cannot find any reference to the part numbers you provided online. The Curt #C13180 Class III receiver hitch is a confirmed fit for the 2000-2006 Toyota Tundra. If you're needing the bolt hole spacing of the #C13180 that you'd looked at,…

I do have a solution for you but we do not have a key that is going to match. What I recommend, since the box is unlocked, is to replace the lock. You can use #UWSLOCKCH501 for a replacement lock and 2 keys.

The Titan Hitch Box Extension for 2-1/2 inch Trailer Hitches, item #RP45018, has two different ratings because if towed with a weight distribution system (see link) you will be able to tow higher capacities. If the extension is used as a weight…