Ultra-Fab Motorcycle Carrier with Ramp Test Course Video

I have a possible solution for carrying your KTM. The Ultra-Fab Motorcycle Carrier, part #UF48-979033 would be a good bargain-priced option. The carrier has a 500 lb capacity and the ramp is included. This carrier is only compatible with hitches that…

You will need to use a hitch mounted motorcycle carrier like the Ultra-Fab #UF48-979033 to carry your Honda Trail 125. This is required due to the weight of the Honda at roughly 250lbs. A bumper mounted rack like the Swagman #S64663 is only rated for…

For your 2008 Ford F-350 we have the Draw Tite hitch part #65049 which is a confirmed fit and has a tongue weight capacity of 500 lbs. The motorcycle carrier we offer that would work best is the Ultra Fab part #UF48-979033. Reason being it weighs…

The front hitch part #65049 that you referenced is a confirmed fit for your 2016 Ford F-250 and only requires minor front fascia trimming on four wheel drive models of the vehicle. The trimming allows the front hitch to pass through the lower air…

For your 2015 Ford F-350 the correct front hitch is the part #65049 which is a confirmed fit. The part #65076 is for newer versions of your truck so it would not be fit. I attached an install video and an install pic as well.

To install the Draw-Tite #65049 on your 2012 F350, the front air dam under the bumper does indeed need to be removed temporarily. Once the hitch is in place, a hole is cut in the air dam that allows the receiver opening to pass through, then the air…

The highest capacity front hitch we offer for your 2015 Ford F-350 is the part #65049 that has a vertical pull rating of 500 lbs. The best solution I could provide for you would be the motorcycle carrier part #UF48-979033 that has a 600 lb capacity…

Your VIN isn't required to give you a front mounted hitch fit. The Draw-Tite Front Mount Trailer Hitch Receiver #65049 is a confirmed fit for your vehicle and is an easy install. It is rated for 500 lbs vertical load and 9000 lbs line pull. It…

The Draw-Tite Front Mount Trailer Hitch Receiver, #65049, will fit the 2011 Ford F-250 Super Duty Lariat. I have included links to the installation details and a video showing a typical installation for reference. A cooler would have to be pretty…

The Curt 13499 is no longer offered but Curt manufactures all of the etrailer hitches for us so you'd be getting the same thing with the #e94CR, with the only difference being that this hitch comes with a matte black finish. The fitguide can be a…

Most hitch mounted motorcycle carriers should not be used on a trailer or motorhome. If you would like a motorcycle carrier that will work on a motorhome, I recommend looking at the Ultra-Fab Motorcycle Carrier, #UF48-979033. We were informed by…

If your camper is up to 8 feet long I recommend going with the Brophy tie downs you referenced #TDSF. These tie downs fit in the stake pockets of the truck bed with the hook end pointed out of the bed. I have included a link to the installation…