Trailer Brake Controller Installation - 2003 GMC Sierra Video

It sounds like you have a Time-Delayed controller like the Tekonsha PowerTrac #39523. If this is the case then what is happening is that the controller sends back the full amount of power that you have it set at when you first press the brake pedal…

The P3 part #90195 is basically the nicest brake controller on the market and we recommend it highly. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that…

I took a look at the online version of the owner's manual for your 2000 Chevy Silverado 1500. It lists the following steps for shifting the transfer case to neutral on the truck. 1. Set the parking brake. 2. Start the vehicle or turn the…

There are some tests you can do to determine if the problem is with the brake controller on the truck or if the issue is on the trailer. In the truck cab you will need to sever the blue wire several inches from the back of the controller. Then use a…

I do not know which controller brand and model you have or which wring adapter you're using. But for reference I linked our range of controllers, such as the Prodigy P3 #90195, confirmed to work with the 2005 Sierra with factory 7-way. This…

Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…

If you have never used a brake controller before, the P2 #90885 will be easier to learn on and use than the P3, #90195 initially. The P3 has several features the P2 doesn't including the ability to change the LED screen color, change the…

The Tekonsha Prodigy P3 Trailer Brake Controller part #90195 will go into a sleep mode after 15 minutes of inactivity. Therefore, with the vehicle shut off and the key out of the ignition it will still stay on till the 15 minute window is reached.…

The P3 brake controller, #90195, will go into a sort of sleep mode after it detects no movement for 15 minutes. While it is on it does not draw very much power. What you can do to make sure it goes to sleep is exit the truck after turning it off,…

The trailer brake controller wires on a 2018 Ford E-450 are blue for brake output, yellow/red or gray/red for 12 volt power, violet/white or yellow/green for stop light, and black/gray or black/violet for ground. These wires will all be located…

The blue electric brake power feed wire should be connected to the terminal in a 7-Way RV style connector, at the 7 o-clock position when looking at the inside of the connector. If looking at the outside of the connector the terminal is in the 5…

The Curt Echo Wireless Trailer Brake Controller part #C51180 has a lifetime warranty so any issues you have with the brake controller will be covered by the manufacturer. That said, I don't think you will have any issues as we have had mostly…