Tekonsha PowerTrac Electronic Brake Controller Review Video

The best brake controller I would recommend for your 2018 Ford F-150 is the Prodigy P3 Brake Controller part #90195. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake…

You're right, the mounting bracket is unique (in a good way) for the Curt TriFlex NEXT Trailer Brake Controller #C24VV. The bracket is smaller and all you do is put the included adhesive tape on the bracket and stick it wherever you like…

The Tekonsha Plug-In Wiring Adapter, #3015-P, will not work with your 2007 Chevrolet Avalanche because General Motors quit offering the plug in type connectors on trucks and SUVs with a factory tow package in 2007. Instead, you will find a bundle…

As long as the P3 is in functioning order, the 3015-P is pinned properly and you installed it into the correct port under your dash the controller should have turned on and you should get a display reading. I would recommend you double-check to be…

As you can see at the 1:20 mark in the attached video, the factory brake controller harness on your 2017 Jeep Cherokee will be located under the driver's side dash panel. The connector will be grey in color and positioned just to the left of…

You can absolutely get a 7-way connection at the back of your 2022 Subaru Outback Wagon. The reason you are only seeing 4-way adapters is because your Outback Wagon does not have factory wiring. So essentially you will need to install a 4-way flat…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

The majority of sewer hoses won't fit inside a standard 4" RV rear bumper because the molded-on ends which contains the lug and bayonet fittings are too large. However, if you were to go with an option that doesn't have the molded-on…

The trailer hitch options for a 1984 Chevrolet C/K Series Pickup all install in the same manor using holes on the underside of the frame. If there are any brackets present they would need to be removed and are most likely not factory therefore the…

From side to side, the mounting holes measure 31-1/4 inches apart, center to center. All three sets of holes are the same distance apart. From rear to front, beginning at the rear of the vehicle the distance from the first set of holes to the second…

The side brackets of the Curt hitch part #C14082 are 9-3/4 inches long so you'd have the clearance needed to fit this on your frame since you have 10 available inches.

Yes, we do offer a plug-in 7-way for a 2022 Hyundai Palisade, the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package part #C68JR which is a plug-in fit.