Lippert Solera Slider Slide-Topper Installation - 2021 Grand Design Reflection Fifth Wheel Video

The Solera 10.5' Slider (Slide-Topper) in Black w/ Black Hardware #LCV000182037 is designed for slide out boxes that are 116 inches to 121-3/4 inches when measured from flange to flange. These measurements are found on each of the product…

For determining the proper size Solera Slider you need, measure the total width of your slide room from the outside including the flange then add about 5" (2-1/2" each for the left/right side overhang). You can have greater than…

The Solera 10.5' Slider (Slide-Topper) in Black w/ Black Hardware #LCV000182037 comes with the awning roll bar rail and also the rail extrusion that attaches to the RV.

Thanks for the flange width of your slide out! Based on knowing that dimension is 117-1/2 inches the correct slide out you need is the part #LCV000182037. This is the 10-1/2 foot long length.

For a slide out that measures 11.6 feet long we have the Solera slide topper part #LCV000168328 which would work great.

The Solera RV Slide-Out Awning #LCV000251461 that you were already looking at is the correct size for your 115" flange to flange measurement. You would not want to go a size larger as the extension rods that hold the roller tube to the…

The size of the brackets of the Solera RV Slide-Out Awning #LCV000182037 is 1.05" from the bottom of the bracket to the top of the rivet hole. With 2-3/4" of space from the top of the vent to the top of the slide you will have more than…

A light coating of all purpose grease, such as the LubriMatic Multi-Purpose Lithium Grease, part number L11316 would work fine. This will help reduce any metal to metal squeaking and wear.

Ball grease #58117 could potentially work for wheel grease on your yard cart. But an actual bearing grease such as #L54FR would be the better option since it was designed for this type of application. Even an all purpose grease such as #L11316 would…

The Solera slide out awning part #LCV000182037 does fit your 2020 Salem Cruise Lite 240BHXL based on the slide out width you mentioned of 118.5 inches from flange to flange. The rail system you mentioned having is what the awning does slide into.

Please note the attached instructions. The Lippert Anti-Billowing Kit for Solera Slide Topper Awnings, #LC78FR should be installed on the end of the awning that is closest to the front of the unit. 1. Make sure awning is fully retracted. 2. Place the…

In order to choose the correct Solera RV Slide-Out Awning for a Grand Design Solitude 310GK you'll need to measure the slide-out from the edge of each flange. I have attached a list of all options below. That said, I am not able to look up the…