Slide Topper that Fits 2020 Salem Cruise Lite 240BHXL

Question

Question:

My 2020 SALEM Cruise Lite 240BHXL came with the slide topper prep on the slide. My slide with is 118.5 inches flange to flange. Is the 10.1 ft wide topper enough for my measurements? Also is the slide rail the topper slides into included? There is a rail that runs the full length of trailer at the roof line a few inches above slide. Does topper slide into that?

asked by: John R

0

Expert Reply:

The Solera slide out awning part # LCV000182037 does fit your 2020 Salem Cruise Lite 240BHXL based on the slide out width you mentioned of 118.5 inches from flange to flange. The rail system you mentioned having is what the awning does slide into.

expert reply by: Jameson C

0

Answer 1

A light coating of all purpose grease, such as the LubriMatic Multi-Purpose Lithium Grease, part number L11316 would work fine. This will help reduce any metal to metal squeaking and wear.

view full answer...

Answer 2

Ball grease #58117 could potentially work for wheel grease on your yard cart. But an actual bearing grease such as #L54FR would be the better option since it was designed for this type of application. Even an all purpose grease such as #L11316…

view full answer...

Answer 3

As a first step I suggest you try using a lithium grease to lubricate the moving parts; you could try a grease such as part #L11316, LubriMatic, Multipurpose Lithium Grease - 16-oz Tub. Since the trailer in question has been used by a previous owner…

view full answer...

Answer 4

On the Lippert Power Stabilizer Jack #LC298707 for your Forest River Evo Trailer Trailer there should be a 20 amp (or higher) fuse/breaker located inline with the red power wire coming from the switch before it reaches the battery. Check to make sure…

view full answer...

Answer 5

We have actually heard from Lippert about this type of issue and they recommend replacing the 6 amp fuse with a 30 amp fuse. This should resolve the issues you're describing.

view full answer...

Answer 6

The Lippert stabilizer jacks like you have use an 6 amp auto reset circuit breaker and a 20 amp fuse or breaker. If you check out the diagram I attached you'll see how it normally would be wired. For a 20 amp breaker you'd need the part…

view full answer...

Answer 7

The 6-amp auto reset breaker included with the Lippert Power Stabilizer Jack #LC298707 (which can also be obtained separately with part #LC134181) will do a good job of resisting damage from the elements but it's not completely waterproof. To…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 10

The Solera Gas Strut part #LC280343 is designed for Lippert-Solera branded awnings. That said, it should be able to be used with others but you'd need to verify the dimensions in order to ensure compatibility. The length for this strut will be…

view full answer...

Answer 11

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 12

We do have the Rhino-Rack Masterkey Lock Barrels #RRRK093-2 which will provide you with 2 new lock cores and keys for your Rhino-Rack Zenith MasterFit Rooftop Cargo Box #RRRMFZ66. As far as pricing goes on the different sets they can change based on…

view full answer...