Roadmaster Base Plate Kit Installation - 2014 Honda CR-V Video

I sure can. The Roadmaster StowMaster 5000 Tow Bar like our item #RM-501 uses a crossbar style base plate. The correct one for your 2014 Honda CR-V is the Roadmaster Crossbar-Style Base Plate Kit item #RM-521567-4. I have linked an installation…

On your 2014 Honda CR-V, when your remove the key you will need to go through the entire process again. I've attached the photo of the owners manual page to assist. This will help you to circulate the fluids and allow the vehicle to be…

As you mentioned in your question, both the Roadmaster EZ4 #RM-521567-4 and EZ5 #RM-521567-5 Base Plate Kits are confirmed to fit your 2014 Honda CR-V. The primary difference between the two models is that the EZ5 does not use a quick-connect…

It sounds like you need to go from the 6-Pole, Round Pin Connector #PK11604 to a 5-Pole, Round Pin Socket #PK11502. This would require making an adapter using the 6-Pole, Round Pin Socket #PK12720 and 5-Pole, Round Pin Connector #PK11501. If I have…

We have everything you would need to flat tow your 2014 Honda CR-V. First lets start with a base plate kit as that is the attachment point on the vehicle. For that you would want the Blue Ox Base Plate kit part #BX2258. I attached an install video…

The easiest way to connect an RV 7-way with combined stop/turn signals to a 6-pole trailer with separate stop and turn lights is to use a converter like #118158. This takes in the combined stop/turn signal and splits it out into separate signals for…

By looking at the picture you sent me it looks like the yellow wire is the left turn, the green is the right turn, the brown is tail lights and the white is the ground. Which leaves us with the two black wires. There are a couple options for…

I have a couple solutions for you, but the adapter you are looking for doesn't currently exist. The square 6-way style connectors are an older style that really aren't used anymore. Your best bet is to replace the 6-way on your Holiday…

Since different manufacturers can use different color wires you need to test the wires by function and not by color. If there is no white wire present, you can trace the wiring on your trailer to find out where the wires terminate. The wire that is…

To flat tow your 2014 Honda CR-V with the Blue Ox Avail Tow Bar #BX7420 to you will need to install a baseplate kit. The kit for your vehicle that will work with the Avail is #BX2258. This is a custom design, specifically for your CR-V. To power the…

There are a number of parts you're going to need in order to flat tow your 2014 Honda CR-V, starting with compatible base plates. I recommend the Roadmaster EZ4 Base Plate Kit #RM-521567-4 due to the clean look they'll give your Honda. For a…

Yes, a 2014 Honda CR-V AWD can be flat-towed with all four wheels down. In order to do so you'll need a base plate kit, tow bar, safety cables, lighting, and braking system. I have attached my recommendation for each of these components below.…