Parts Needed to Flat Tow 2014 Honda CR-V Behind Motorhome

Question:

I have a 2000 itasca 36ld and a 2014 honda crv. Which tow bar and braking kit package do you have that is a complete towing and braking system. Thanks

asked by: Edwin F

Expert Reply:

To flat tow your 2014 Honda CR-V with the Blue Ox Avail Tow Bar # BX7420 to you will need to install a baseplate kit. The kit for your vehicle that will work with the Avail is # BX2258. This is a custom design, specifically for your CR-V.

To power the Honda's lights you can use the Roadmaster Tail Light Wiring Kit # RM-155. This bypasses the CR-V's wiring system so there is no splicing necessary. It works independently of the vehicle by installing additional plugs and sockets inside its tail lights.

I looked up your owner's manual and it states that you'll need to remove the accessory radio fuse to avoid draining the battery while flat towing. To make this process easier you can install the Roadmaster FuseMaster Fuse Bypass # RM76511. This way you will only need to flip a switch instead of removing the fuse.

Another part you may need is a supplemental braking system. The Air Force One # SM99243 is the best system for you since your Itasca Horizon has air brakes. Using a system specifically designed for air brakes prevents any false braking on the CR-V. I've linked an install video of the Air Force One on a 2014 Honda CR-V for you.

Finally, you'll likely need a high-low adapter. I've attached an article to help you determine the correct rise or drop your setup requries. I've also linked our selection of adapters for you to look at once you know what you need.

In addition to my recommendations I've linked some articles on flat towing that you may find helpful.

expert reply by: Jameson C

Richard

4/22/2020

If I want to charge my tow vehicle battery from my MH while on the road, can I simply run a 12v power wire from my 7 pin plug to the towed battery hot terminal or do I need a current limiter or diod in the line?

Chris R.

4/23/2020

Yep, to maintain charge on your towed vehicle you basically just need to run a power wire from the RV's 7-Way (assuming its 12V pin is active) to the battery. A much easier method though is to use the Roadmaster Kit # RM-156-25, which will connect the 6-Way at the front of the towed vehicle to its battery, making it so that it receives charge as soon as you hook the vehicle up to the motorhome connector.

Richard C.

4/23/2020

Thanks, great help.