Roadmaster Tail Light Wiring Kit Installation - 2014 Honda CR-V RM-155 Video

On your 2014 Honda CR-V, when your remove the key you will need to go through the entire process again. I've attached the photo of the owners manual page to assist. This will help you to circulate the fluids and allow the vehicle to be towed…

We have everything you would need to flat tow your 2014 Honda CR-V. First lets start with a base plate kit as that is the attachment point on the vehicle. For that you would want the Blue Ox Base Plate kit part #BX2258. I attached an install video…

To flat tow your 2014 Honda CR-V with the Blue Ox Avail Tow Bar #BX7420 to you will need to install a baseplate kit. The kit for your vehicle that will work with the Avail is #BX2258. This is a custom design, specifically for your CR-V. To power the…

I found a copy of the owners manual for the 1999 Chevrolet S-10 truck and in the Recreational Towing section, Chevrolet says your 1999 S-10 should not be flat towed. They recommend towing it on a trailer only. If the vehicle absolutely must be flat…

Yes, a 1997 Chevy S-10 4x4 can be flat-towed behind a motorhome with all four wheels down. However, you will need to either disconnect the drive shaft each time or get a drive shaft coupling which we do not offer but I can point you in the right…

I checked with Roadmaster and they do list the bulb and socket kit, #RM-155, as a fit for the 2010 and 2012 Honda CR-V. However, to be certain I recommend drilling a 1/16 inch hole in the back of the tail light housing and then using a small piece of…

There are some great options for baseplates for a Honda CR-V, but the Roadmaster Direct-Connect #RM-521448-5 is made specifically for use with a Jeep Wrangler. If you have a 2007-2011 CR-V, go with #RM-521559-5. If you have a 2012-2014, use…

According to Roadmaster, their #RM-521567-5 direct-connect base plates are compatible with your Falcon 5250 tow bar. Compared to the #RM-521567-4 which requires a crossbar, the #RM-521567-5 makes for a cleaner install that's easier to use. To…

The Roadmaster Direct-Connect Base Plate Kit - Removable Arms #RM-521448-5 are a confirmed fit for your 2014 Jeep Wrangler Rubicon and should fit just fine with your Falcon 5250 tow bar. I reached out to my tech contact at Roadmaster and there are…

I have a solution for you, however, the Demco #DM9518320 baseplate kit you were checking out is only compatible with the 75th Anniversary or Rubicon Hard Rock Edition. The Roadmaster EZ5 Direct-Connect Base Plate Kit #RM-521448-5 is the most…

Looks like you have a round 4-way connector in the picture you submitted. The colors you mentioned aren't totally a match for standard colors but they are close. Normally the colors are: White - Ground Return Green - Right Turn and Brake Lights…

The crossbar style of Roadmaster base plate kits like the part #RM-521567-4 do not actually come with a crossbar but instead attach to tow bars that have crossbars like the Roadmaster Falcon 2 part #RM-520. Or if you prefer not to use the crossbar…