Customers compare RP69FR to these similar products
Products Featured in this Video
Hi there Ram owners, HEMI 2013 Ram 1500. We're gonna be taking a look at and showing you how to replace your Reese weight distribution shank with the extended nine hole adjustment shank that gives you an additional drop or rise. This is particularly useful after you have lifted your vehicle so that way you can get the appropriate adjustment to match up to your trailer. And this is what our new… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
That is a great question. Both of those are great weight distribution hitches. Between the two, I prefer the Reese Dual Cam II over the Strait Line. The Dual Cam uses an L-bracket to attach to the frame, instead of a chain and lift bracket.…
view full answer...When it comes to installing a lift kit on your 2022 Airstream 33 Foot Classic The Torflex Lift Kit - Tandem Axle - 3-1/8 inch Lift #K71-725-02 will work for you if you have a tandem axle. This system is not compatible with top-mounted axles, and is…
view full answer...For your Pro Series weight distribution system on your 2012 Dodge Ram 3500, I recommend the Pro Series WD Shank - 14" Long - 4-3/4" or 6-1/2" Drop - 1.5K TW #RP63971. This will account for the 2-3 inches of drop you…
view full answer...Even when stored in the somewhat controlled environment of a garage, tires are still subject to dry rot and flat spotting. Even if the tire tread has plenty of depth left and you can't see any cracking with the naked eye, the generally…
view full answer...The Sway Bracket Jackets for Equal-i-zer Weight Distribution Systems - Qty 2 #EQ95-01-5150 are designed for 2 inch wide brackets and square bars so they are not a fit for your Husky brackets. They will only fit the Equalizer brackets #EQ95-01-5600.
view full answer...I spoke with my contact at Reese who said there should not be any play in the head once the bolts are properly torqued down. When installed it is possible that the bolts were not torqued to the right specs according to the installation…
view full answer...The parts in question are conical tooth washers. On the Curt weight distribution systems they go between the nuts and the head using the bolts that hold the head to the shank. I have included a picture that points them out for you. The tooth side…
view full answer...I attached an FAQ for you to check out that details all of this, but what you need to do is get your truck and your trailer on level ground and take a couple measurements. You will need to measure from the ground to the bottom of the coupler on the…
view full answer...We do have a nice selection of adjustable ball mounts that might work to tow your trailer level with your 2009 Ram that features an 8 inch lift. I first recommend taking a few measurements to see exactly what kind of drop you are needing on the ball…
view full answer...Flexco Manual Pull-Out Steps for RVs - Double - 7-7/8" Drop/Rise - 24" Wide - 350 lbs #SMFP-2100 are from Stromberg-Carlson and are Flexco model steps. So in other words they are one in the same. I included some pictures showing dimensions…
view full answer...I went out to the warehouse and the large 3/4 inch bolts used on the Reese round bar weight distribution head #RP58112 require a 1-1/8 inch socket or wrench. For information on torque specs please refer to the instructions I have linked for you.
view full answer...Group 27 batteries are typically 12" L x 7" W x 9" T so I'm assuming your 14" x 14" measurement is just the two batteries butted up against each other. The options that we carry wouldn't really work with the long…
view full answer...