Review of Roadmaster Tow Bar Accessories - High Low Adapter - RO24FR Video

The Reese weight distribution shank part #RP69FR that you referenced has a towing capacity of 12,000 lbs and a tongue weight capacity of 1,200 lbs.

The parts in question are conical tooth washers. On the Curt weight distribution systems they go between the nuts and the head using the bolts that hold the head to the shank. I have included a picture that points them out for you. The tooth side…

The Patriot Hitches Adjustable Drop Hitch Receiver Adapter #PH67SR will allow you to raise your jet ski. This adapter is rated for use with hitch mounted accessories unlike the Blue Ox #BLU53XR you found which is only compatible with tow bars/flat…

The Roadmaster High-Low Adapter for Tow Bar - 2.5" Hitch - 6" Rise/Drop #RO24FR weighs a total of 14 pounds. It is important to note that any time you use a hitch adapter, you decrease the overall weight capacity of the hitch by 50%.

There are a few troubleshooting steps to help you figure out why you have no power. I would start by making sure that there is not any corrosion or debris blocking your connection points. If they are clean or still no power after cleaning, I would…

In the past, Roadmaster did NOT recommend using the High-Low adapters for anything other than flat towing a vehicle, as they had never tested it for such a purpose. They're now saying the adapter can be used on hitch accessories, as long as its…

The easiest way to tell the difference between the 2007 Chevy Silverado Classic and New Body Style is the tail gate or the tail lights. The new body style will have a large Chevy bow tie emblem in the center of the tail gate. It will also have red…

I may have a solution for you, but we do not have a 2-1/2" Rise/Drop adapter for flat towing with a 6" rise/drop. Since you've got about 3" up or down to work with when it comes to how level to the ground your tow bar must be, you…

A hi-low adapter like the part #RM-048-6 you mentioned is designed for a rolling load like a vehicle being flat towed behind a motorhome. Although it hasn't been designed for a hitch mounted accessory like a bike rack, it can be used for that…

You can use a Hi-Low Hitch to level the RV hitch to the tow bar. These hitches have a solid-steel shank, allowing a 10,000-pound capacity and 400-pound tongue weight. I do not have a dimensional drawing at this time but I did go out to our warehouse…

Technically, if the receiver hitch on the tow vehicle has a 2-1/2 inch opening then you could use Titan extension #RP45292 provided the Jeep weighs less than 6,000 pounds (for the 24 inch length) or less than 4,500 pounds (for the 34 inch length).…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…