Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter Installation - 2017 Keystone Cougar Video

Yes, it will! The 5" Offset Gen-Y Hitch Gooseneck Trailer Hitch item #GY83XR is specially designed to work with the Ram factory puck system. It will push the connection point for the gooseball and your trailer back 5" towards your…

Mainly the difference is the Lippert 1116 is considered a medium length pin box and the 1621 is considered a long one. It's not by much but the 1621 stick out about 3 inches further.

The height setting will be based on what allows your trailer to be towed level. The forward and back position is for additional trailer overhang to cab clearance. If you need more clearance run the rear positition, if not forward would be fine.

The B and W Companion hitch part #BWRVK3305 that you referenced weighs 159 lbs. The head is easily removed to make the install and removal of the hitch easier as well since it splits the weight up. The head weighs 71 lbs.

The B and W Companion part #BWRVK3300 that you referenced weighs 148 lbs. This hitch will fit the Ford Super Duty hitch prep packages on 2011 and newer Ford trucks.

I checked with Dexter, manufacturer of many trailer parts, and according to them there should be at least 1 inch of space between the tires when under load. So once your trailer is loaded and ready to tow, if you have more than 1 inch of space…

Easiest way it to measure vertically between the mounting holes of the pin box. If they are 2 inches apart up and down then you have a 1621. If that distance is instead 2-1/2 inches then you have a 1716. The part #LC1191191 that you referenced is for…

You can mount trailer axles above or below the leaf springs. The difference is just the amount of ground clearance that the trailer would end up having. The biggest advantage with the spring below the axle (trailer will be lower) is that you would…

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

The lock code could be located on the key itself, on the face of the lock core, or one a sticker attached to the lock (see photos). Once you find this you can then order the correct replacement key assuming you have a Global Link, Fastec (FIC),…

The dimensions of the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box part #GY58GR are mirrored after that of the pin box it is designed to replace. In other words, pretty much every pin box that will bolt up to the Lippert 1621 pattern…

The Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box - Lippert 1621/1621 HD - Auto Latch - 25K #GY66FR you were looking at is a confirmed replacement for your Lippert 1621 HD pin box and will not require any shims. The #GY66FR has the same…