Front Mount Trailer Hitch Installation - 2003 Chevrolet Silverado - Draw-Tite Video

For your 2004 Chevrolet 1500 HD you want front hitch #65028.

The Draw-Tite front-mount hitch #65028 includes the mounting hardware to install it on your 2005 Chevrolet Silverado. Installation requires three wrenches, 3/4-inch, 7/8-inch and 18mm, as outlined in the instructions that are linked for you. I do not…

We offer two front-mount hitches for your 2002 Chevy Silverado 2500HD and both can be seen on the link at right. The installation instructions for both, which are also linked, indicate that in the case of both the Curt hitch #31108 and the Draw-Tite…

The air dam does need to be trimmed (or removed) to install front mount trailer hitch #65009. The skid shield, if present, would have to be removed. I have included a link to the installation instructions for this hitch so you can see the…

I have attached the installation instructions for the Curt Front Mount Trailer Hitch Receiver, #31084, on a 1999 Jeep Cherokee. The link to the instructions is located on the right of this page.

Absolutely not - the etrailer Trailer Hitch Receiver #e95ZR for your 2023 Hyundai Palisade will have no issues related to the recall that Hyundai has issued for their trailer hitches. According to my research the Hyundai recall actually has more to…

We do have a selection of trailer hitches available that are specifically designed to fit your 2021 Hyundai Palisade, but I think your question is more specific to any potential warranty issues with Hyundai when it comes to installing one of these.…

In order to determine if the front mount trailer hitch #650287 will interfere with the plow on the 2002 GMC Sierra 2500HD, you will need to look at the installation instructions for the hitch. I have included a link to them for you. If you compare…

The Draw-Tite front mount receiver #65028 has a 2 inch receiver opening so basically any bike carrier that will fit a 2 inch hitch will work. I have included a link to the bike racks we carry that fit a 2 inch receiver. If you can tell me how many…

The Curt Trailer Hitch Receiver part #C15312 is what I recommend as a replacement for the factory trailer hitch on a 2002 Chevrolet Silverado 2500HD. In regards to the bolt hole spacing, this will be a different for the Curt Trailer Hitch Receiver as…

The Draw-Tite front mount hitch #65028 and the Curt Front Hitch #31108 are very similar, but they are not the same hitch. This was not intentional, the manufacturers just so happened to come up with very similar designs for the hitch coincidentally.…

Due to the design of the front of your 2005 Chevy Silverado 3500 the only place you'll be able to have a front hitch opening is below the front fascia like where the Curt #31108 installs. This would be best option we have, but if you really…