Replacement High Pointe Microwave for 2018 Winnebego Navion 24V with a High Pointe EC028BMR

Question

Question:

I have a 2018 Winnebego Navion 24V with a High Pointe EC028BMR that is not working. Is the HP99ZR the replacement. I want to make sure before I order it. Thanks Dave

asked by: Dave R

0

Expert Reply:

Hey Dave, yes the High Pointe Convection Microwave our part number # HP99ZR is the exact same as the part number you are looking for so this would be exactly what you are looking for as a replacement.

expert reply by: Jameson C

0

Answer 1

Hi Charles, I recommend the High Pointe RV Convection Microwave - Black #HP99ZR or Stainless Steel #HP49ZR. These convection microwaves are 20-1/2" wide x 14-3/4" tall x 18-11/16" deep so you should be able to just squeeze…

view full answer...

Answer 2

The trim kit of the High Pointe RV Convection Microwave #HP99ZR would be used if you were going to mount it in a cut out area. Otherwise you can set it on a shelf like you mentioned. The trim kit would allow it to install using screws. It does not…

view full answer...

Answer 3

The 520EM925AWWKIT trim kit included with the High Pointe Standard RV Microwave #HP39ZR is approximately 20.75” W x 15” H.

view full answer...

Answer 4

The Apollo 1/2 Time Oven to the best of my knowledge was just a convection microwave so if this is what you are looking for we have some great options. I understand the microwave had a rather small footprint so if you have space constraints then…

view full answer...

Answer 5

The High Pointe microwave part #HP49ZR would work great as a replacement for what you have now as it's the correct dimensions and also works great. We also have it in black with the part #HP99ZR.

view full answer...

Answer 6

I contacted Trimark in regards to a replacement part for the Trimark 030-0900. 030-0900 is actually a series number not a specific part number. To find the part number you will need to take the interior handle completely off the unit. On the back…

view full answer...

Answer 7

The trim plate for the High Pointe RV Convection Microwave #HP99ZR has an overall size of 24" wide x 16.75" tall.

view full answer...

Answer 8

Hey Dave, yes the High Pointe Convection Microwave our part number #HP99ZR is the exact same as the part number you are looking for so this would be exactly what you are looking for as a replacement.

view full answer...

Answer 9

It sounds like there is an electrical short on your trailer wiring that is activating your left rear brake assembly and that is why the brake continues to drag and get hot. Since you have swapped the brake assembly out and still had the problem you…

view full answer...

Answer 10

The distance from the trim plate to the back of the High Pointe RV Convection Microwave #HP99ZR is 20.47" basically 20 1/2", and the trim kit itself measures 24”W x 16.75”H.

view full answer...

Replacement High Pointe Microwave for 2018 Winnebego Navion 24V with a High Pointe EC028BMR

Product Page this Question was Asked From

Continue Researching