Amperage Draw of Each Speed of MaxxFan MA00-06401K

Question

Question:

what is the amp or wattage draw for each speed, thank you.

asked by: Gale P

0

Expert Reply:

The MaxxAir MaxxFan # MA00-06401K that you asked about has a maximum draw of 4-1/4 amps when it is set at it's highest setting. Since this is a 4 speed fan it will decrease about 25 percent for each setting that is one step lower. This means that it will draw about 1 amp per setting. My contact at MaxxAir confirmed this.

expert reply by: Jameson C

0

Answer 1

I reached out to my tech contact at MaxxFan and confirmed the MaxxFan Deluxe Roof Vent w/ 12V Fan - Manual Lift - 4 Speed - Smoke #MA00-06401K can be left open while traveling at highway speeds. You won't need to have the cover like the more…

view full answer...

Answer 2

The MaxxAir Mini Deluxe Trailer Roof Vent w/ 12V Fan #MA00-03801 will work well in your Sprinter van. It is a very quiet fan, so you will have no problem sleeping while it is running. The fan is a single speed and will not reverse to bring outside…

view full answer...

Answer 3

I spoke with my contact at MaxxAir regarding the MaxxFan Deluxe Roof Vent #MA00-06401K. He said that while it technically can be done, they do not recommend wiring any of their fans to a separate switch. The reason for this is that their fans are…

view full answer...

Answer 4

There will be no problem at all, and if you'd like to use a 12 volt lithium battery that will absolutely work with the MaxxFan roof vent you asked about: - MaxxFan Deluxe Roof Vent w/ 12V Fan - Manual Lift - 4 Speed - Smoke #MA00-06401K

view full answer...

Answer 5

It sounds like the circuit board is faulty and for replacement we have the Replacement Printed Circuit Board part #MA10-04301k-v16 which should allow you to get your MaxxAir Vent Fan Model 4401K back up and running on the lowest speed setting. If you…

view full answer...

Answer 6

If you are getting no power at all when you hit the on/off button on either of your MaxxFan Deluxe Roof Vent w/ 12V Fan - Manual Lift - 4 Speed - Smoke #MA00-06401K vents, then there is most likely not power getting to them. I recommend using a…

view full answer...

Answer 7

I recommend the MaxxFan Deluxe Roof Vent w/ 12V Fan, #MA00-06401K for a smoke color dome or, select part number #MA00-05301K for a white dome. This is a manual lift design that has 2 arms to support the dome and keep it open instead of one. It has a…

view full answer...

Answer 8

It would be time for a new circuit board for your #MA00-06401K with the part #MA10-04301K-V16. You would not need a voltage regulator.

view full answer...

Answer 9

For your MaxxFan that is a 4301 Series the correct circuit board is the part #MA10-04301K-V16.

view full answer...

Answer 10

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Thanks for the pictures of your roof vent lid Marty! Based on that the correct replacement is the Ventline part #BVD0449-A01 that you referenced if you wanted white or the part #BVD0449-A03 for the same smoke color you have now.

view full answer...

Amperage Draw of Each Speed of MaxxFan MA00-06401K

Product Page this Question was Asked From

Continue Researching