5th Wheel Trailer Hitch Installation - 2011 Ford F-350 Super Duty Video

The Fifth Wheel and Gooseneck Trailer Wiring Harness, #PK11893-11932, will fit on your 2012 Ford F-150. I have attached an installation video for you to check out. The vehicle is different, but the installation process is the same.

I attached a picture that shows the pin out diagram for the Pollak 5th Wheel / Gooseneck T-Connector with 7-Pole #PK11893-11932 that you referenced.

Thanks for the pictures and congrats on the trailer! To replace your Turning Point pin box you will want the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box item #GY48GR. This is the only gooseneck pin box that fits the mounting points for…

There is only one option to replace a Lippert, which is now Curt, Turning Point. You will want the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box item #GY48GR. As far as make and model goes. 5th wheel trailer pin boxes are not model…

The best place to add the scissor jacks would be the rear corners of the trailer frame as that will give you the most stabilization and it's the standard location for installing them. If you have a set already installed there then I would go…

Yes, you can add two stabilizer jacks to the long tail portion of your Sabra to help stabilize it along with your Lippert Ground Control part #LC675817. I recommend the pair of 2 Ultra-Fab Scissor Jacks part #UF48-979031 to add to the rear of the…

The exact placement of the hitch will depend on which installation kit is used. Generally speaking, fifth wheel hitches are installed so that the king pin will fall either directly over the rear axle centerline or within a few inches forward of that…

I attached a video for the Companion Hitch part #BWRVK3500 which shows how it is assembled in the bed of a truck. You would just need to reverse the steps to remove it.

A Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box item #GY73FR is not going to move your trailer closer to your Dodge Ram and if it does it won't be a significant amount. The cushioning of this setup will greatly reduce shock to your…

We do have the T-bolts, #LC314594, and I believe you also need the shorter swing bolts, #LC314595. But I checked with Lippert and the actual Strong Arms are only available in the kits. For trailers over 58 inches between the landing gear you would…

Congrats on the new trailer and thanks for the picture and extra information! I just spoke with my rep at Lippert and it looks like your Jayco Eagle has a Lippert Turning Point which limits your options. The only gooseneck to 5th wheel adapter for…

A wedge is needed, yes, and the Lippert Turning Point pin box does come with a universal wedge, but it is not a very good fit with the B&W Companion #BWRVK3710. So I highly recommend instead using the 5th Airborne Custom Wedge for B&W Fifth…