Fifth Wheel and Gooseneck Wiring Harness Installation - 2015 Ford F-250 PK11893-11932 Video

No, they can not! The B&W Universal Base Rails item #BWRVR3200 and any other comparable set of rails will not be compatible with a preinstalled gooseneck hitch. I do have quite a few options to potentially add some 5th wheel rails using an…

The B&W Custom Underbed Installation Kit #BWGNRK1111-5W that fits your 2012 Ford F-250 Crew Cab Short Box installs on the outside surfaces of your frame rails. Any suspension kit that also installs on the outside of the frame will not work,…

Thanks for the pictures! The plate you are needing to get behind is for your gooseneck ball in bed hitch. You will have to remove that to reach the bolt. This will allow you to install the Firestone item #F2703 air bags on your 2012 Ford F-250. I…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

Look in the bed of your 2012 Ford F-250. Do you see 4 holes cut in the bed around the center of it? If so then you have the factory rail kit. If not then you do not have it. If you do not have it then you would want the part #BWGNRK1111-5W for the…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

I attached a picture that shows the pin out diagram for the Pollak 5th Wheel / Gooseneck T-Connector with 7-Pole #PK11893-11932 that you referenced.

The arms that hold the head of the B and W Companion hitch part #BWRVK3400-5W are designed to be installed in various positions to allow for different height and offset settings. If you check out the picture I attached you can see the different ways…

The blue locking piece you referenced unfortunately is not easily removed. In fact, there's basically no way to get it out without breaking it. The installers here have tried several times to get it out and always end up breaking it. The easiest…

If your 2003 Chevrolet Silverado 2500 HD has the factory 7-way connector at the rear of the truck and it has a bed at least 6 ft long, and is not a flareside/stepside, the fifth wheel hitch that includes the wiring for the bed of your truck I…

DeeZee does not exclude the fit of their DeeZee Tailgate Assist Custom Tailgate-Lowering System for Pickup Trucks #DZ43203 for the versions of the 2008 Ford F-350 that have the tailgate step and handle like what you have so this would fit and work…

Yes since your 2004 Ford F-250 came with a factory 7-way trainer connector you can use The Curt 5th Wheel/Gooseneck Custom Harness #C56070 to install an in-bed 7-way. To get the bumper 7-way to you can use The Curt T-Connector Wiring Harness #C55774…